Advertisement
T
I
WEETER
NSTALLATION
SURFACE-MOUNT
Figure 3. Surface-mounting the tweeter
and connecting the crossover.
1
BLACK (—)
ATTACH BASE
WITH SCREWS, THEN:
RED (+)
2
3
FLUSH-MOUNT
Figure 4. Mounting the tweeter using the
I-Mount™ (patent no. 5,859,917) flush-mounting
kit. Also see Figure 5.
3
1
2
reference series
BLACK (—)
(—) SMALL LUG
BLACK
RED (+)
RED
(+) LARGE LUG
TWEETER ANGLE
Figure 5. Aiming the tweeter at a desired
listening position.
3
ROTATE ENTIRE ASSEMBLY
TO AIM ANGLED TWEETER
TOWARD LISTENER.
1
SLIDE SCREW UP OR
DOWN TO ADJUST
TWEETER ANGLE.
2
TIGHTEN SCREW TO
LOCK ANGLE SETTINGS.
4
SECURELY TIGHTEN
THE LARGE HAND NUT.
Figures 6A through 6D. The Starfish™ tweeter
mount is intended to be used when the tweeter
will be installed behind a factory grille (e.g.,
replacing the factory tweeter behind a door
panel). The Starfish will allow you to mount the
component tweeter directly to the panel itself or
to the area behind the panel. The six mounting
tabs can be removed easily to create a number
of custom configurations.
Note: Check screw clearance before installing.
Use glue if clearance is an issue.
Note: Not all possible mounting configurations
are shown.
Figure 6A. Behind grille panel.
Figure 6B. Mounted to surface behind
grille panel.
Figure 6C. Mounted to grille panel.
Figure 6D. In-dash location (may require gluing).
Advertisement
