Table of Contents Ov erview ..........................2 Features ........................2 Package Contents ....................... 3 Dimensions........................3 Connectors ........................4 Camera Cabling........................5 Connect Power ......................5 Connect Ethernet Cable....................5 Connect Alarm I/O ....................... 5 System Requirements......................6 Access Camera ........................7 Setup Video Resolution ......................
Overview The IS-IP290 integrates superior Sony Progressive CMOS sensor with 3x/18x auto-focus zoom lens. The IS-IP290 is capable of delivering Multi-streaming Full HD 1080P real-time video. In addition to MJPEG real-time streaming, the camera develops superior H.264 codec to smoothly deliver Full HD video streaming over the internet without distortion.
Package Contents Please check the package contains the following items listed below. IS-IP290 Power terminal block Quick Guide (bundled software and documentation) Dimensions The IS-IP290’s dimensions are shown below. 3x Camera 18x Camera...
Connectors The diagram below shows the IS-IP290’s reset button and various connectors. Definition for each connector will be given as follows. Definition Remarks LINE OUT & LINE IN / MIC IN Two-way audio transmission Power LED Power connection indication (green light).
Use of Category 5 Ethernet cable is recommended for network connection; to have best transmission quality, cable length shall not exceed 100 meters. Connect one end of the Ethernet cable to the RJ-45 connector of the IS-IP290, and the other end of the cable to the network switch or PC.
System Requirements To perform the IS-IP290 via web browser, please ensure your PC is in good network connection, and meet system requirements as described below. Items System Requirement ® ® 1. Intel Pentium M, 2.16 GHz or ® Intel Core 2 Duo, 2.0 GHz...
Access Camera For initial access to the IS-IP290, users can search the camera through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch” folder in the supplied CD. Device Search Software Setup Step 1: Double click on the program Device Search.exe. After its window appears, click on the <Device Search>...
Page 10
DHCP, in the finding device list. The way to change the IS-IP290’s network property is specified below: Step 1: In the finding device list, click on the IS-IP290 that you would like to change its network property. On the selected item, right click and select “Network Setup.”...
Page 11
<Finish> to exit the installation process. Step 3: Click on <Finish> to close the DC Viewer installation page. Once the DC Viewer is successfully installed, the IS-IP290’s Home page will be able to correctly display as the figure below.
Setup Video Resolution Users can setup Video Resolution on Video Format page of the user-friendly browser-based configuration interface. Video Format can be found under this path: Streaming> Video Format. The default value of Video Resolution is as below: H.264- 1920 x 1080 (30 fps) + H.264 720 x 480 (30 fps) 2M Real time For more Video Resolution combination detail, please refer to Appendix: Video...
File Download window will come out. Click on <Save> and specify a desired location for saving the configuration file. Upload To copy an existing configuration file to the IS-IP290, please first click on <Browse> to select the configuration file, and then click on the <Upload> button for uploading.
Appendix A: Technical Specifications Camera 3x / 18x Zoom AF IS-IP290 Image Sensor Sony Progressive CMOS Picture Elements 1920(H) x 1080(V) Shutter Speed 1~ 1/10000 sec. Lens Lens 3x/18x Optical Zoom, Auto Focus 3x- 3.0 ~ 9.0 mm Focal Length 18x- 4.7 ~ 84.6 mm...
Page 15
General Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Humidity 10% ~ 90%, No Condensation 3x: 165.0 x 80.0 x 52.4 mm (L x W x H) Dimension 18x: 183.3 x 80.2 x 52.4 mm (L x W x H) 3x: 360 g (0.80 lb) Weight 18x: 450 g (1 lb)
Appendix B: Delete the Existing DC Viewer For users who have installed the DC Viewer in the PC previously, please first remove the existing DC Viewer from the PC before accessing to the IS-IP290. Deleting the DC Viewer In the Windows <Start Menu>, activate <Control Panel>, and then double click on <Add or Remove Programs>.
Step 4: Click on <OK> to accept the settings and close the Security Settings window. Step 5: Click on <OK> to close the Internet Options screen. Step 6: Close the browser window, and restart a new one later to access the IS-IP290.
Need help?
Do you have a question about the IS-IP290 and is the answer not in the manual?
Questions and answers