Care and Safety Information
CAUTION!
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualifi ed
personnel.
Setup precautions
Finding a suitable location
– Place the set on a fl at, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifi er).
– Do not put anything above or under
the set (e.g., CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4")
clearance from the rear and the top of
the set and 5 cm (2") from the left and
right to prevent overheating.
10cm
5cm
Avoid high temperature, moisture,
water and dust
– Apparatus must not be exposed to
dripping or splashing.
– Do not place any object or items that
can damage the apparatus (e.g., liquid
fi lled objects, lighted candles).
6
1_dvdr3460-97_um_en_26851a.indd 6
1_dvdr3460-97_um_en_26851a.indd 6
5cm
10cm
Cleaning discs
Some problems occur (frozen picture,
sound disruptions, picture distortions)
because the disc is dirty. To avoid these
problems, discs should be cleaned on a
regular basis.
To clean a disc, use a micro fi bre cleaning
cloth and wipe the disc from the centre
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for
analogue discs.
Since the optical unit (laser) of the
recorder operates at a higher power than
regular DVD or CD players, cleaning
CDs intended for DVD or CD players
may damage the optical unit (laser).
Therefore, refrain from using a cleaning
CD.
About recycling
These operating instructions have been
printed on non-polluting paper. This
electronic equipment contains a large
number of materials that can be recycled.
If you are disposing of an old machine,
please take it to a recycling centre. Please
observe the local regulations regarding
disposal of packaging materials, exhausted
batteries, and old equipment.
2007-08-27 1:04:30 PM
2007-08-27 1:04:30 PM