Light; Adjusting Image Size; Working With Negatives - Genee World Vision Elite User Manual

2. Select the enlargement required using the "
3. Adjust the focus using the "Near" and "Far" buttons or "AUTO" button.

LIGHT

The arm lights are powered on when the power is turned on. Each time you
press the "LAMP" buttons, the lighting changes occur as demonstrated.

ADJUSTING IMAGE SIZE

To reduce or enlarge the image size displayed on the screen, press the "
(Zoom in) or "
W

WORKING WITH NEGATIVES

The visualizer is automatically set to display normal materials on the screen
when the power is on. To display negatives, turn on the backlight by pressing
the "LAMP" key, and then press the "Neg" button to display the film negatives.
Press the "Neg" button again to display normal materials in the color mode.
The arm lights turn on
The back light turns on
All the lights turn off
" (Zoom out) button.
T" and "
+
12
" buttons.
W
T"
+