Page 1
2004 Verity Audio Incorporated This manual is copyrighted by Verity Audio Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or part, without prior written consent of Verity Audio Inc.
Servicing — This unit is covered by a one year warranty. Opening the unit will void your warranty. Refer all servicing to an authorized Verity Audio technician. Placing or moving — Do not place the unit on an Contact your nearest dealer for instructions. Service unstable cart, stand, tripod, bracket, or table.
Page 4
ROCCO OWNER’S GUIDE V.01 February, 1 , 2004 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
12-inch high-power transducers configured in a bass- circuitry. All of that, grants the Rocco a capacity to reach high reflex cabinet. Both transducers are firmly attached together via summits of 120 dB SPL of acoustic pressure at very low a vibration canceling system.
How to Connect Two Roccos The Rocco accepts RCA or balanced inputs. It can be true or When two LFE outputs are available: inversed polarity. It offers lowpass slopes of 12 to 24 dB per Connect your preamplifier/processor left LFE output octave.
220-240 VAC use 2.5 amperes, slow-blow and for 100-120 listening position. Compare your two main speakers with all VAC use 5 amperes, slow-blow. your Rocco(s). If you don’t have any level meter, simply do it by ear. Should you use your Rocco in a home-theater system, the...
We recommend starting with the above recommendations. The more familiar you will get with your Rocco and its integration with your system, the more you will develop the knowledge and skills to better optimize your system. Your efforts will be rewarded in creating an awe-inspiring performance.
The mechanical energy is then canceled. Even on the most demanding material you will Serial numbers; hardly notice that your Rocco is working. But you will certainly Place of purchase; ear strong, accurate and fast decay bass. Moreover, the Rocco Nature of the problem;...
4. Make sure your audio equipment selectors and controls are suitably adjusted (selector(s), volume control(s), mute switch(es), etc.); 5. Make sure the control level on your Rocco is not turned all the way down; 6. Make sure your software material (CD, LP, tape etc.) is properly installed and currently running;...
February, 1 , 2004 Specifications Limited Warranty The Verity Audio Rocco is covered by a limited warranty Bandwidth 18 Hz to 100 Hz ± 3.0 dB against defects in material and workmanship for a period of 30 • 35 • 40 • 50 • 56 • 63 • 71 • 90...
Page 12
12: Slope Selector - Select the low-pass crossover slope here - 12dB/octave or 24dB/octave 13: RCA/XLR Selector - Select the input type here 14: Phase Selector - Select the phase polarity here 15: Power indicator - Blue LED that indicates if the Rocco is actually on.