Safety Information; Battery Information; Compliance With Fcc Regulations - Hello Kitty KT4601 Owner's Manual

Safety Information:

• Do not attempt to disassemble or alter any part of the unit that is not expressly described in this
guide. Internal inspections, alternations and repairs should be conducted by qualified service
personnel.
• Prevent liquids such as water and beverage from flowing into the product.
• Do not use the product where electric appliances are prohibited.
• Protect the product from violent impact and vibration.
• Place the product far away from heat sources, and protect the product from direct sunlight.
• No compensation responsibility for malfunctions caused by improper use.
• It is prohibited to conduct illegal audio recording.
• Save the data in the memory of the product to other storage device before repair. No
compensation responsibility if the data are lost during repair .

Battery Information:

For the first use of the product, you are recommended to fully charge your unit. (If the battery capacity
sign appears blank, it indicates the unit needs to recharge.) Connect the provided USB cable
correctly and charge the battery until the sign is fully displayed. The charge time is
approx.8 hours.

Compliance with FCC Regulations:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
4