Page 3
Getting familiar with your new ASTAK product ......1 Packing list..................2 System Overview ................2 Usage Suggestions ................. 2 Product Certifications ..............3 Warning................... 3 Care and Maintenance..............3 Setting up your ASTAK network camera ........4 Register your camera..............5 Register and configure your camera ..........
Page 4
DDNS Settings..................22 User.....................23 Email ....................23 Alarm ....................24 Schedule .....................25 Motion Detection ..................26 FTP .....................27 Auto Capture ..................27 System Tab ..................28 Time Settings..................28 Initialize ....................29 Device Information ................30...
Page 5
This section will familiarize you with your new ASTAK product, to ensure easy setup and usage of your wireless network camera.
Page 8
This section will guide you through the initial setup of your Network Camera. AC Power Network (router)
Sign Up free Complete Registration. If the auto-detection pop-up doesn’t come up, please log out and try again in a couple of minutes. Depending on your network connection, it may take up to 5 minutes for your camera to be detected.
Page 10
Once clicked Complete Registration you will be shown the Register New Device Window. Simply give your camera a name of your choice.
Page 24
Only advanced users should configure network settings. Configuring for wireless networks in Chapter 2.
Page 25
See Chapter 1: Setting up your ASTAK camera for more information.
Page 26
DDNS is NOT required if you are using Yoics to remote access your camera.
Page 27
Only the Administrator account can access the Media, Advanced and System sections. All other users only have access to the Home section. The default values for the passwords are the same as the user names (e.g. the password for guest is guest.)
Need help?
Do you have a question about the IP700 and is the answer not in the manual?
Questions and answers