Summary of Contents for Riverstone Networks ELECTRIC FIREPLACE HEATER
- Page 1 ELECTRIC FIREPLACE HEATER ASSEMBLY AND OPERATION MANUAL Riverstone Industries Corporation www.RSIWW.com Customer Service: 877-373-3078...
-
Page 2: Important Safety Instructions
Important Safety Instructions: PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fireplace. Failure to follow these important safety instructions may cause fire, electric shock or damage. - Page 3 For best results, install out of direct sunlight. NOTE: A complete electric fireplace heater should consist of two parts, the wooden mantle and the fireplace heater. It is not recommended to use the fireplace heater without the wooden mantle. Unpack...
-
Page 4: Operating Instructions
Operating Instructions: Once the fireplace heater insert has been properly installed and connected to a ground electrical outlet, it is ready to operate. Note: Ensure the circuit breakers for the power supply are turned on. The controls are located behind the grill below front glass and can be accessed by pulling the grill up from the top, forward and down. - Page 5 Cleaning glass door: Remove dust with clean dry cloth. Remove fingerprints and other marks from glass door by using a clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surfaces. Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use abrasive cleaners or spray liquids on this surface.
Need help?
Do you have a question about the ELECTRIC FIREPLACE HEATER and is the answer not in the manual?
Questions and answers