EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NO OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, OTHER THAN THOSE PROVIDED IN WRITING HEREIN, SHALL APPLY TO THIS UNIT, PERIMETER TECHNOLOGIES, INC. SHALL NOT BE LIABLE FOR ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FOR ANY PERIOD IN EXCESS FOR THE PERIODS OF EXPRESS WARRANTIES PROVIDED ABOVE.
You can try to locate the break visually, or contact your local Pet Stop All of us at Pet Stop thank you for the opportunity to provide safety and convenience for dealer for repair.
It is important that a consistent routine is established and maintained when walking your pet off the property. Remove the Pet Stop receiver collar, attach a leash to your pet’s regular collar and proceed out the point of exit (usually the driveway). Proceed down the driveway and instruct your pet to sit several feet within the boundary.
Training Tips Precautions Now that your Pet Stop System has been installed and is operational, it is time to train your pet to • DO NOT use this system for guard dogs or vicious animals. If you believe your dog the system.
Page 6
Your Pet Stop dealer has just installed your new Pet Stop Pet Fence System. Here is a with the dog’s skin. review of how it works:...
Your transmitter also has a built-in sensor which monitors the boundary wire. If, for any reason, If you wish to attach the receiver to a collar other than the one provided by your Pet Stop dealer, you the wire becomes broken, the transmitter display will flash and a continuous single beep will alert must create two holes for the receiver inserts, washers, and probes.
Page 8
Pet Stop signal, the receive first emits an audible tone and then administers a correction to remind your pet of its boundaries. If the signal is not the Pet Stop signal, the receiver disregards it. This signal processing eliminates false alarms which could confuse your pet and make training difficult.