Advertisement
ASSEMBLY INSTRUCTIONS
BATTERY POWER SUPPLY
Step 1: Unzip battery pocket on back of BOOMPOD™.
Step 2: Open battery compartment.
Step 3: Insert 4 "AA" cell batteries (not included).
Step 4: Close battery compartment securely.
Step 5: Place battery pack in pocket and zip closed.
Step 6: Turn BOOMPOD™ on by turning Power knob (A) clockwise.
AC POWER SUPPLY
(not included, can be purchased at electronics store)
Step 1: Connect adaptor cord to power input (C) on Control Panel
Step 2: Using a 6 Volt AC adaptor (sold separately) , plug adaptor to wall outlet.
Step 3: Turn BOOMPOD™ on by turning Power knob (A) clockwise.
CAUTION: Use ONLY 6 Volt AC 500mA adaptor! Different voltage may cause permanent damage to BOOMPOD™!
CONNECTING TO GAME CONSOLES
Note: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out.
Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1)
Step 2: Plug Red/White RCA cord from game console into RCA INPUT (B) of BOOMPOD™. (Fig. 2)
Note: It may be necessary to extend your BOOMPOD™ further away from your TV or console. Here's how. (Fig.3)
Step 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console.
Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler (3c).
Step 3: Connect other end of RCA cord (3b) into RCA INPUT (B) of BOOMPOD™.
GAME CONSOLE
Cable supplied with game console
Battery
Compartment
TV
AUDIO COUPLER (3c)
Fig. 1
IN
4
Fig. 2
Fig. 3
3c
3b
BACK VIEW
DASHBOARD
6V AC Power Supply
(sold separately)
BOOMPOD™
Advertisement
