Grizzly G6050 Instruction Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Nail Gun
  5. G6050
  6. Instruction manual

Grizzly G6050 Instruction Manual

Round head framing nailer kit
Hide thumbs Also See for G6050:
Table of Contents

Advertisement

Quick Links

Download this manual
ROUND HEAD FRAMING
NAILER KIT
MODEL G6050

INSTRUCTION MANUAL

COPYRIGHT © MAY, 2002 BY GRIZZLY INDUSTRIAL, INC.
1821 VALENCIA ST., BELLINGHAM, WA 98227
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
PRINTED IN TAIWAN
ONLINE MANUAL DISCLAIMER
THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CUR-
RENTLY BEING SHIPPED. THE MACHINE CONFIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS
ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS MANUAL MAY NOT
EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT
DIFFERENCES. PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G6050 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly G6050

Summary of Contents for Grizzly G6050

  • Page 1: Instruction Manual

    COPYRIGHT © MAY, 2002 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN TAIWAN ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CUR- RENTLY BEING SHIPPED.

  • Page 2: Safety Instructions For Pneumatic Tools

    Keep work area well lighted. G6050 Round Head Framing Nailer Kit SAFETY Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

  • Page 3: Maintain Tools With Care

    WHILE UNSUPERVISED. 23. IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING THE TOOL. Seek formal training or research books or maga- zines that specialize in pneumatic tools. G6050 Round Head Framing Nailer Kit RECOMMENDED Consult DAMAGED PARTS. ALLOW UNTRAINED...
  • Page 4 DO NOT USE A CHECK VALVE OR ANY OTHER FITTING that allows air to remain in the tool. G6050 Round Head Framing Nailer Kit Operating this nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself,...
  • Page 5 Commentary We are proud to offer the Grizzly Model G6050 Round Head Framing Nailer. This model is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoy- able operation and proof of Grizzly’s com-...

  • Page 6: Compressed Air System

    Compressed Air System The Model G6050 is designed to be oper- ated at 80-120 psi. Do not exceed the maximum operating pressure! Before you use your new nailer, regulate the air pressure on your air compressor to barely over the minimum psi for your nail- er.

  • Page 7: Operation

    2"-3 ⁄ " Capacity: 50 Nails Single/Bump Fire Mode The Model G6050 is equipped with a sin- gle/bump fire trigger. To select single or bump fire operation: Disconnect the air supply from the nailer! Locate the hex nut that secures the safety yoke mechanism to the trigger housing.

  • Page 8: Operating Nailer

    Figure 3.) Figure 3. Example of nail deflection. G6050 Round Head Framing Nailer Kit Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the location that the nail deflects.

  • Page 9: Clearing Jammed Nails

    Throw the damaged nail away and insert a new nail stick that only con- tains clean, undamaged nails. DO NOT use dirty or damaged nails in your nailer! G6050 Round Head Framing Nailer Kit...

  • Page 10: Oiling Nailer

    As mentioned before, the best option is to install a filter/lubricator/regulator unit such as the Grizzly Model H2333 in your air line. Figure 6. Lubricating nailer via air inlet. NOTICE Too much oil in the nailer will ruin...

  • Page 11: Replacing Pistons/O-Rings

    Replace the rear cap assembly and tighten the 4 cap screws. 12. For more assistance, or to install a complete O-ring set, refer to the appropriate breakdown diagram in the back of this manual. G6050 Round Head Framing Nailer Kit...
  • Page 12 G6050 PART BREAKDOWN G6050 Round Head Framing Nailer Kit...
  • Page 13 SET PLATE P6050078 BUTTON HD CAP SCR 80A P6050080A AIR PLUG P6050082 FLAT WASHER 83A P6050083A GASKET WASHER P6050084 STEPPED PIN P6050085 SPACER P6050088 SPRING WASHER P6050090 BRACKET 92A P6044077 FLAT WASHER P6050093 RUBBER PAD G6050 Round Head Framing Nailer Kit...

  • Page 14: Troubleshooting

    Tool runs slowly or has a loss of power. Fasteners frequently jam the nailer. Nailer does not fire. G6050 Round Head Framing Nailer Kit CAUSE 1. O-rings in trigger valve housing are damaged. 1. Loose screws in housing. 2. Damaged O-ring.

  • Page 15: Warranty And Returns

    WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.

  • Page 16: Warranty Card

    ___Yes 15. Would you recommend Grizzly to a friend? ___Yes 16. Would you allow us to use your name as a refer- ence for Grizzly customers in your area? Note: We never use names more than three times. ___Yes 17.Comments:________________________________...
  • Page 17 Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Place Stamp Here...

Table of Contents

Save PDF