Configuring Application Messaging In Peoplesoft Release 8.1 - BEA WebLogic User Manual

b. Click Save.
c. Click the Return to Transaction List hyperlink.
d. To ensure that your data entry is not lost, click Save again.
8. Continue with the instructions in Viewing the PeopleCode for a Message on page D-22.

Configuring Application Messaging in PeopleSoft Release 8.1

You can configure PeopleSoft 8.1 to send an asynchronous outbound message to the
Simple File Handler.
To configure application messaging in PeopleSoft 8.1:
1. Create and configure a new Message Node.
2. Ensure the message is active and is routed to the proper Message Channel.
3. Configure the Message Channel.
4. Configure the Simple File Handler in the Gateway.
These tasks are described in detail in the following procedures.
Procedure: How to Create and Configure a New Message Node
To create and configure a new Message Node:
1. From the File menu, select New and click Message Node.
BEA WebLogic Adapter for PeopleSoft User's Guide
You have finished creating and configuring the new Gateway Node.
Using PeopleSoft 8 Integration Broker
D-9