Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Anedio A1
- Page 1 A1 Stereo Power Amplifier Operating Manual...
- Page 2 Welcome Thank you for purchasing the Anedio A1 Power Amplifier! Anedio is founded upon the principle that the enjoyment of highest- quality music should be available for everyone, not just for the esoteric few. Our quest is to attain the most realistic and faithful reproduction of music, enabling the listener to experience its beauty, pathos, joy, and delight more fully.
-
Page 3: Important Safety Instructions
Anedio A1 Power Amplifier Important Safety Instructions The lightening symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may constitute a risk of electric shock. The exclamation mark within an equilateral triangle is intended to alert the user to important operating and maintenance instructions. - Page 4 Anedio A1 Power Amplifier 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Page 5 Anedio A1 Power Amplifier Setting Up Package Contents Model A1 Stereo Power Amplifier • AC Power Cord, 16 AWG • Extra Fuses • User Manual • Measurements of Each Unit • Front Panel Rear Panel...
- Page 6 Anedio A1 Power Amplifier Setting Up Placement of the Amplifier Place the amplifier between the two loudspeakers, instead of setting it off to one side. This keeps the lengths of interconnects and speaker cables short for optimal sonic performance. Remember that the ideal cable is no cable. The signal can never be improved by going through a longer cable.
-
Page 7: Power Switch
Anedio A1 Power Amplifier and those of the loudspeakers. Never connect the output terminals to the chassis or to the ground. This will cause a short circuit and may damage the amplifier. The outputs are balanced, i.e., both positive (+) and negative (-) terminals move differentially with respect to the ground, and they are not to be shorted to the ground. -
Page 8: Power Indicator Led
Anedio A1 Power Amplifier When turning on and off your music system, the power amplifier should be the last component to be turned on and the first component to be turned off. This prevents power on/off transients from being transmitted to loudspeakers. - Page 9 Why Passive Bi-amplification? Passive bi-amplification can improve the sonic quality of the system in a subtle but significant way. The Anedio A1 Power Amp is conceived specifically to take full advantage of the benefits of passive bi-amplification.
- Page 10 That is why, in some systems, passive bi-amping actually degrades the sonic quality. In the A1 Amp, the bi-amplification feature was conceived at the very beginning of the design stage, not as an afterthought, and is optimized for the lowest ground noise.
- Page 11 Please note that this mode can be used only for those loudspeakers that have separate terminals for low and high frequency drivers. Two A1 Amplifiers are requires for a stereo setup in the passive bi- amp mode. Make sure that the shorting jumpers across the high and low frequency drivers of the loudspeakers are removed for the passive bi-amp operation.
-
Page 12: Specifications
Anedio A1 Power Amplifier Specifications Continuous Power Output: 70 watts per channel (8 ohms) 75 watts per channel (4 ohms) Both channels driven simultaneously Dynamic Power Output 90 watts per channel (8 ohms) (CEA-2006): 105 watts per channel (4 ohms) -
Page 13: Troubleshooting
“normal.” If it is unintentionally set to “biamp,” the resulting sound will be mono. If the problem persists, please contact Anedio via the Contact page at www.anedio.com. WARNING: Repairs are to be performed by qualified service personnel only. -
Page 14: Warranty And Repair
The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from Anedio accompanies the re-sale. Repair In the event of a defect or malfunction, contact Anedio for return authorization (via the Contact page at www.anedio.com).
Need help?
Do you have a question about the A1 and is the answer not in the manual?
Questions and answers