Grizzly STIRLING ENGINE KIT 3 H8103 Owner's Manual page 10

the finished parts for your stirling engine require precise machining and the equipment to do so. however,
it is beyond the scope of this manual to provide instructions on how to machine these parts.
use the machining specifications and illustrations beginning on page 12 to produce the parts required to
assemble your stirling engine (all dimensions are in millimeters).
Note: Some parts have been pre-machined at our factory and are identified as such below. Also, there are
some common fasteners and the wood base that are not included with this kit.
When you have completed machining the parts, you should have the finished parts listed below. reference
this information, the assembly Diagram on page 9, and additional assembly Instructions on page 10
to complete the assembly of your stirling engine.
finished parts
Ref Specs
No. Qty page finished part Description
1 1 12 Eccentric drive Wheel
2 1 13 Bushing
3 1 13 Brass hex Bolt M3-.5 x 12
4 1 14 Cooling piston Connector rod
6 1 14 slotted pivot Connector #1
7 1 15 pin
9 1 15 Mounting plate
10 4 16 threaded support shaft
11 1 16 radiator
14 1 17 Fuel reservoir lid
15 1 17 Fuel reservoir
16 1 18 Base plate
19 1 18 heating piston drive rod
pre-finished parts
Ref
No. Qty finished part Description
5 1 Cooling Cylinder
12 1 heating Cylinder
13 1 Wick holder
common fasteners & Wood base (not provided)
Ref
No. Qty Description
8 8 Cap screw M4-.7 x 8
17 4 hex nut M5-.8
18 1 Wood Base
-8-
Machining parts
Ref
No.
20
21
22
23
24
25
26
27
28
30
32
35
Ref
No.
33
34
Ref
No.
29
31
36
Specs
Qty page finished part Description
1 19 heating piston drive rod shaft
2 19 A-Frame Bracket
1 20 slotted pivot Connector #2
1 20 Brass hex Bolt M3-.5 x 12
1 21 Brass hex nut M3-.5
1 21 heating piston Connector rod
1 22 Axle 16mm
2 22 Connecting Arm
1 23 Axle 36mm
1 23 Fly Wheel
2 24 Axle shaft
1 24 lock Collar
Qty finished part Description
1 Cooling piston
1 heating piston
Qty Description
2 set screw M3-.5 x 10
4 Cap screw M5-.8 x 16
1 set screw M3-.5 x 4
h8103 stirling Engine Kit 3