Table of Contents
Advertisement
CONNECTIONS
COMMON INTeRFACe
The unit is equipped with a CI slot. The CI slot allows you to insert a CAM (Conditional Access
Module) with an appropriate subscription card for some pay for view services.
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial
broadcasting.
Fully insert the CAM (Conditional Access Module) into the CI (Common Interface) slot on the side
of the unit with its label side facing you.
Important notes:
• Switch off the TV and unplug from the AC power mains before insert or remove the CAM.
• The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the
TV terminal may be damaged if the CAM is forcefully inserted.
• Some CAMs may require setting up. Refer to the module instruction manual for details of the
settings.
CONNeCTING TO DeVICeS WITH A COMPOSITe (yeLLOW RCA-TyPe) VIDeO OUTPUT
To connect to A/V devices such as a VCR, camcorder or video game system.
- Connect to a VCR / Video Game System /
Camcorder
Connect the AUDIO / VIDEO cable (not
included) as shown.
Make sure you connect the cable from the
other equipment (AUDIO and VIDeO OUT)
to this unit (AUDIO and VIDeO IN). Press the
FUNCTION or AV button to select AV1 mode.
Note:
Please refer to the instruction manual for the
other equipment for more information.
CONNeCTING TO SOURCeS WITH SCART
Devices with RGB output must be connected to
the SCART input:
Connects the SCART from the source to the
corresponding SCART on this unit (SCART cable
not included) as shown.
Make sure you connect both to SCART to
SCART.
To operate the connected device and play the
source, first press the FUNCTION or AV button
to select the AV2/SCART mode.
To AUDIO /
VIDEO IN jacks
(AV IN 1)
SCART
CABLe
If your VCR permits, then connect your
antenna to your VCR and VCR RF to your TV
- 18 -
To AUDIO / VIDEO OUT jacks
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
