ALCATECH BPM STUDIO 4 PRO User Manual page 103

RC V3 Description
Controlling the Preview-Player:
Whenever the Sample-Player is in pause-mode,
meaning, when no sample is played, you can start
the preview player from within the File Archive
with the [0] button. Now the selected title will be
played over the monitor channel and can be
screened independently from the running
program. In this mode the two
buttons function as rewind and fast forward.
[40] LCD Displays
In the LCD display the most important feedback
of the particular player is indicated.
[40a] Indicates if speed control is applied with or
without master speed function. (At this remote
control unit only at the program window of the
two players).
[40b] The deviation of the title from its standard
speed in %
[40c] Current title. Here the title and artist are
indicated out of the ID3 tag of this MP3 File. This
display will scroll automatically if not all
information of this tag can be displayed. If
problems with the system's performance are at
hand, this scrolling can be deactivated in the
Program Options, on the register tab remote
control unit.
[40d] Indicates the pre load buffer
[40e] Current playtime (Can be switched between
ELAPSED and REMAIN with the [TIME] button
[19])
[40f] Indicates the selected pitch range. This
selection can be made with the multi purpose
buttons
A, B, and C ([49], [50] and [51]) if this is set up
accordingly in the Program Options. (see also
page 11)
[40g] Signal level indicator
[41] to [44] Track- and Search buttons
With the track buttons you can select titles in
currently loaded play list. The search buttons are
used for exact setting of Cue Points. For this
purpose a small portion of the title will be played
as a loop. The position of this loop will then be
moved with the search buttons.
Also read the chapter about players in this
manual.
[45] Cue LED
This LED will come on if the player goes into
pause mode
[46] Play LED
This LED will come on if the player goes into play
mode
[47] Manual Fader res. Sampler Pitch
The horizontal control below the Sample Player
can be used as manual fader, sample volume
control, or pitch control of the sample player. The
according settings are defined in the Program
Options, on the remote control register tab.
When set as manual fader cross fades between
player A and B can be created without external
mixer.