Please review all the information provided in this manual to ensure that you attain the best possible sound quality from your system. Harbinger HPX-BBE series powered loudspeakers were designed using advanced acoustic and audio techniques with premium Harbinger HPX Series powered loudspeakers provide outstanding components, comprehensive protection circuitry, and robust clarity and sound power for a variety of applications.
Important Safety Instructions Please keep this instruction manual for future reference and for the 10. POWER SOURCES – This product should be operated only from the duration of owning the HPX powered loudspeaker. Please carefully type of power source indicated on the rating label. If you are not read and understand the instructions inside this owner’s manual before sure of the type of power supply to your home, consult your product attempting to operate your new powered loudspeaker.
Page 4
EXCESSIVE SPls unplug it from the wall outlet. This will prevent damage to the product Harbinger HPX-BBE Series powered loudspeakers are capable of due to lightning and power-line surges. producing extremely loud volume levels that can cause permanent 24.
Features SYSTEM PETP-FILM DIAPHRAGM COMPRESSION DRIVER (HPX215-BBE) • Built-in BBE Sonic Maximizer ® • Optimized acoustic and magnetic design achieves outstanding • High efficiency Class G low frequency amplification with custom clarity and reliability signal processing • A one-piece, PETP film diaphragm and surround optimizes •...
HPX-BBE Model Descriptions HPX215-BBE: The HPX215-BBE was designed to operate sitting on the floor, stage, or on top of subwoofer enclosure. Do not attempt to pole mount this loudspeaker atop the HPX118S-BBE subwoofer cabinet! HPX118S-BBE: The HPX118S-BBE was designed to operate sitting on the floor or on the stage.
Page 8
lED POWER INDICaTOR lEVEl CONTROl The green LED POWER indicator, located on the back of the amplifier, Turn the LEVEL control clockwise to increase gain and counter will illuminate when the AC Power switch is in the “ON” position. The clockwise to decrease gain.
Page 9
When all of the loudspeakers in a system are operating with the same Subwoofer OUTPUT (Full-range): Use the outputs marked OUTPUT polarity, a positive polarity signal causes the excursion (the forward (Full-range) (left and/or Right) when you are connecting to other motion) of all loudspeaker cones.
Page 10
FRONT LED your system (pops, clicks, thumps), make sure to power ON your HPX Use this switch to turn the blue LED light on the Harbinger logo badge series loudspeakers in the proper order. Improper sequencing while on or off.
Set-up Diagrams HPX215-BBE Main Speakers with Two HPX118S-BBE Subwoofers MAIN OUTPUTS Checklist • Make certain loudspeakers are Powered OFF and Levels • Set the Low Cut switch on the Main Speakers to OFF. turned down. • Set Subwoofer BBE to ON. •...
Page 12
linking Multiple HPX Main Speakers HPX215-BBE MAIN OUTPUT Checklist • Also known as Daisy-Chaining, linking multiple speakers will • Power ON Mixer, then Power ON speakers. send the exact same input signal from one speaker to the next. • Bring the Mixer’s volume up to normal operating level. •...
Page 13
linking Multiple HPX-BBE Subwoofers and Main Speakers MAIN OUTPUT Checklist • Make certain loudspeakers are Powered OFF and Levels • Connect the HP Output R of Right Subwoofer1 to the Input of turned down. Right Main Speaker 1. • Connect the Mixer’s Main Left Output to the Left Input of the Left •...
The sole and exclusive remedy of the foregoing limited warranty shall be limited to the repair or replacement of any defective or non-conforming Harbinger provides, to the original purchaser, a two (2) year limited component. All warranties including, but not limited to, the express warranty...