Download Print this page

ALCHEMIST 8 INTEGRATED Instruction Manual

Integrated amplifier

ALCHEMIST

I N S T RU C T I O N

M A N U A L

P R O D U C T

E I G H T

INTEGRATED

Table of Contents

Need help?

Do you have a question about the 8 INTEGRATED and is the answer not in the manual?

Page 1 ALCHEMIST P R O D U C T E I G H T INTEGRATED I N S T RU C T I O N M A N U A L...
Page 2 POSITIONING The Product 8 Integrated Amplifier is a class A/B type device, and as such it will need to dissipate a little heat. It should therefore be placed on a flat surface with free space all around. Under no circumstances must the unit become covered as this may result in the unit overheating.
Page 3 The PRE-OUT facility has been provided so that you can follow a logical upgrade in the future, following such a path: 1 Product 8 Integrated 2 Product 8 Integrated + Product 8 Power (Utilizing both the power amp and the power section of the Product 8 Integrated in bi-amp mode) 3 Product 8 Power + Product 8 Pre.
Page 4: Input Sensitivity
Any cleaning of your P RODUCT 8 integrated amplifier should be done with a clean dry cloth or soft bristle brush. There is no need to polish the gold effects, a simple dry wipe is sufficient. Do not use any solvent or silicone based cleaning solutions as this may result in tarnishing.