American DJ Hyper Gem LED User Instructions page 5

Hyper Gem LED™
ADDR -
DMX Address Setting.
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR"
is displayed, press ENTER.
2. "1" will now be displayed and flashing. Press the UP or
DOWN buttons to find your desired address. Leave the display
on this address, and after a few seconds the address will be
saved into memory.
CHND -
This will let you switch between 4 Channel DMX
mode and 256 Channel DMX mode.
1. Tap the either the MENU button until "CHND" is displayed,
press ENTER. Either "4 CH" or "256 CH" will be displayed
2. Tap the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the either the MENU button until "SLND" is displayed,
press ENTER. "MSTR", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim and exit.
SHND -
Show modes 0-12 (Factory programs). In show
mode you choose the show speed to run, or you can turn
on sound active mode and have the show as a sound active
unit.
NOTE: For this mode to run properly, the unit needs to be
set to Master, unless the unit is connected in a Master-
Slave configuration.
01. Tap the MENU button until "SHND" is displayed, press
American DJ - www.americandj.com - Hyper Gem LED™ Instruction Manual Page 9
®
System Menu Hyper Gem LED™
ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 0-10. Programs 1-12 are factory programs, while "Sh
0" is random mode. Press the UP or DOWN buttons to find
your desired show.
3. Press the ENTER button, to select your desired show speed.
4. Once you have selected the show speed press ENTER and
then press and hold the MENU button for at least 3 seconds to
confirm.
COLO
patterns to remain static.
NOTE: For this mode to run properly, the unit needs to be
set to Master, unless the unit is connected in a Master-
Slave configuration.
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
SOUN
mode. A show must be selected before the unit will run in
sound active mode.
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
SENS
level. 0 for least sensitive, 100 for more sensitive.
American DJ
- In this mode you can select 1 of 15 colors or color
- In this mode you can run the unit in sound active
- Using this mode, you can set the sound sensitivity
- www.americandj.com - Hyper Gem LED™ Instruction Manual Page 10
®
System Menu