American DJ Gobo Motion LED User Instructions page 5

Gobo Motion LED
System Menu: When making adjustments press ENTER
to confirm your setup and then press and hold the MENU
button for at least 3 seconds. To exit without making any
adjustments press the MENU button.
ADDR -
DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until
"ADDR" is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
When you have found your desired address press ENTER.
CHND -
This will let you switch between 1 Channel mode,
3 Channel mode, and 18 Channel mode.
1. Press the MENU button until "CHND" is displayed, press
ENTER. Either "1CH", "3CH" or "18CH" will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SHND: SH 0 - SH8
- Show modes 0-8 (Factory programs).
Show mode can run with or without sound active mode.
1. Press the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 0-8. Programs 1-8 are factory programs, while "Sh 0"
is random mode. Press the UP or DOWN buttons to find your
desired show.
3. When you have found your desired show press ENTER, then
press and hold the MENU button for at least 3 seconds to acti-
vate.
American DJ - www.americandj.com - Gobo Motion LED Instruction Manual Page 9
®
System Menu Gobo Motion LED
SLND -
master/slave configuration.
1. Press the MENU button until "SLND" is displayed, press
ENTER. "MSTR", "SL 1" or "SL 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim and exit.
SOUN -
1. Press the MENU button until "SOUN" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode, or
"OFF" to deactivate sound active mode.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
SENS -
1. Press the MENU button until "SENS" is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to confirm.
BLND -
1. Press the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
American DJ
This will let you set unit as a master or slave in a
Sound Active mode.
Sound sensitivity control.
Blackout or Stand by mode.
- www.americandj.com - Gobo Motion LED Instruction Manual Page 10
®
System Menu