For information or assistance with the setup, operation, troubleshooting, or repair of your system, you may first wish to call the dealer from whom you purchased. If necessary, please feel free to call the Datavideo Help Desk above: From Monday through Friday, 9:00 am through 6:00 PM Local time You may also contact our International web site at (http://www.datavideo-tek.com)
Introduction RMC-90 is a Remote Control Panel specially designed to work with SE-800 control panel simultaneously. RMC-90 provides a wired remote function of video channel selection keys, programmable effect function keys, T-Bar control…most of the control key functions from SE-800. It includes a Tally control for the Datavideo TLM-404 LCD panels and three GPI triggers to control Datavideo DV Bank.
Control Panel Audio Select for channel A, B, C or D and A+V function key This row of selector buttons has a internal LED to show which input channel is active. If the A+V function key is engaged (LED on), the audio source channel selected on the Main Source bus is automatically selected.
Page 6
Video Main-source and SUB-source Select for channel A, B, C or D and BK (Background) function key It is used to select which of the four video input channels or background will be selected as Main Source and which of the four video input channels or background will be transitioned to or used as a sub source in an effect.
Page 7
GPI-1 to GPI-3 Enable the three terminals GPI trigger output on rear panel for video play-pause control of Datavideo DV Bank F1-F10 and F11-20, F21-30 Control of the 30 users programmable preset locations for storing customized effects and transitions. The numbered buttons 1-10 above access 10 locations. To access F11 to F20, you need to first press the F11-20 button until the LED is lit, then press one of the single numbered buttons to access presets F11-F20.
Page 8
It can be either all the way up, all the way down, or anywhere in between. To enable the SE-800 T-Bar, the T-Bar on RMC-90 must be at either end of its travel. PLEASE NOTE, T-Bar on RMC-90 CAN NOT...
Rear Panel connection GPI Trigger outputs to control DV Bank Connect to Datavideo TLM-404 4”x4 TFT LCD or connect the external video devices Tally control interface, such as Camcra Connect to SE-800 Remote RS-232 interface...
Page 10
DC 14.4 --- 15V input from SE-800 Power adaptor DC 12V 0.5A output to connect BAC-03 Audio converter DC 14.4 --- 15V output to SE-800 Power input...
More Peripherals Datavideo TLM-404 4”x4 TFT LCD panel Datavideo DV Bank Native DV recorder and GPI Trigger cable Built-in 120GB HDD for 9 hours native DV recording Datavideo BAC-03 Balanced-Unbalanced Audio converter...
Page 12
All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2003. P/N: 082061305E1...