Optional Setting; Channel List; Manual Register - gfm V07LCD32 Owner's Manual

32” digital / analog lcd tv
Table of Contents

Advertisement

O
PTIONAL SETTING

Channel List

The channel list function lets you remove undesired channels from the
channel registration list.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Channel List", then press
[ENTER].
4
Use [Cursor K / L] to select the channel you want to
remove, then press [ENTER].
The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH K / L].
To reactivate a removed channel, highlight it using
[Cursor K / L] and press [ENTER]. The channel
display lightens.
When you remove a major channel, its minor
channels are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
A71F4UH__EN.indd 21
A71F4UH__EN.indd 21

Manual Register

The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
Channel List
Channel List
Highlight channels for
DTV
6
DTV
6
Ch Up/Down key selection.
27
DTV
8
DTV
8
9
9
DTV
DTV
48
48
58
58
DTV
67
BACK
Ch Select
Watch/Skip
Back
ENTER
5
Press [SETUP] to exit.
Note:
• If set up completes successfully,
"Registered to the Channel List" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
11
Manual Register
Manual Register
Register
For analog channels,
select a channel to register using
number keys.
For digital channels,
you must perform Autoscan function.
BACK
Ch Change
Back
21
EN
2007/05/24 14:12:32
2007/05/24 14:12:32

Advertisement

Table of Contents
loading

Table of Contents