Ferrari Infotainment 6111 Operating Manual
  1. Manuals
  2. Brands
  3. Ferrari Manuals
  4. Automobile Accessories
  5. Infotainment 6111
  6. Operating manual

Ferrari Infotainment 6111 Operating Manual

Radio / navigation system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operating manual
Guía del usuario
Mode d´emploi
Radio / Navigation System
Infotainment 6111

Advertisement

Table of Contents
loading

Related Manuals for Ferrari Infotainment 6111

Summary of Contents for Ferrari Infotainment 6111

  • Page 1 Operating manual Guía del usuario Mode d´emploi Radio / Navigation System Infotainment 6111...

  • Page 2: Table Of Contents

    Contents Safety Instructions Switching loudness on / off Navigation quick access Ferrari surround Advice on general traffic safety Navigating from the quick access Subwoofer Protect an entry Controls overview Crossover Delete entry General operation Compression Delete list Menu basics Resetting the settings...
  • Page 3 Contents Information during route Voice entries CD mix Reception optimization Repeat CD guidance Band width control Directory mix Display destination information AM mode Repeat directory Display/save position Call up the media main menu Possible settings for AM stations Display/change route options Switching the detailed track Search function Settings...
  • Page 4 Contents Telephone operation Functions Telephone Quick Voice entries Call up the telephone access Placing a call to an address Bluetooth not yet switched on Call number directly book entry Bluetooth cellular telephone Protect an entry Functions in the quick access not yet connected Delete entries Protect an entry...
  • Page 5 Contents User voice commands Direction of rotation of the Commands for radio mode turn/push control Retrieving user voice command Commands for the radio status Clock settings display Software-Update Set system language Commands for the radio Display language settings quick access User voice commands Volume of voice messages Commands in the modify...
  • Page 6 Contents Navigation main menu commands Commands in menu for selecting Commands for the address a Bluetooth device during export entry menu Commands during an Commands for the special opened entry destination (point of interest) menu Address book main menu Commands for the route commands options menu Voice entries menu commands...

  • Page 7: Safety Instructions

    Safety Instructions Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents no risk, distraction or inconvenience to you, your passengers or other road users. Traffic laws and regulations will apply in each and every case. Destinations may only be entered when the vehicle is stationary.

  • Page 8: Advice On General Traffic Safety

    Advice on general traffic safety This automobile radio device is intended and approved for installation in passenger cars, commercial vehicles and buses (vehicle classes M, N und O) with an on-board voltage supply of 12 volts. The installation or service must only be carried out by qualified personnel. Improper installation or maintenance may result in faulty operation of electronic vehicle systems.

  • Page 9: Controls Overview

    Controls overview Controls overview 1 Information button 10 Right hand side turn/push control 2 ON / OFF switch Push = Confirm Turn = Browse in lists and menus 3 Radio mode select 11 Undo button (Back) 4 Mode select CD/CDC/Memory card 12 Slide lock for detachable control panel 5 Navigation mode select 13 Display...

  • Page 10: General Operation

    General operation General operation Menu basics Main menu Note: In the main menu of an operating mode After a short period without control Note: you have access to the various functions input in the displayed quick access the and settings in that operating mode. If an entry in a list is abbreviated due to display will change automatically to the excessive length (three dots at the end...

  • Page 11: Status Display

    General operation Status display You always obtain the status display by In the status screen you obtain all pushing the button. 1005 required information regarding the In an active route guidance repeated currently selected operating mode. pushing of the button facilitates You see the options menu of the radio changing between the combined display Note:...

  • Page 12: Entry Menus

    General operation If another menu is hidden by the menu Entry menus You can change the character set of the entry then this will be indicated by selectable characters selecting In some cases data may be entered, this a small triangle at the end of the menu different symbols.

  • Page 13: Anti-Theft Device

    General operation Anti-theft device Entry of incorrect code number After powering up using the The following display will appear in button the code number entry menu will Your Infotainment has dual anti-theft case of an incorrect code number entry. be displayed after a short period of time. protection: •...

  • Page 14: Removing/Inserting The Control Panel

    General operation Removing/inserting the control Note: panel If the code number has been entered 1009 Part of the front control panel can be incorrectly three consecutive removed as an additional, effective anti- instances then the device will locked as If the control panel is reinserted within theft protection measure.

  • Page 15: Inserting/Detaching Blanking Cover

    General operation Insert Inserting/detaching blanking Removal of blanking cover Position the control panel in place on Remove the control panel as described cover the left hand side. under “Removing/inserting the control A red plastic cover is included with the Firmly push the control panel. panel”...

  • Page 16: Switching The Unit On/Off

    • An active route guidance will start Switch off the vehicle ignition. again if no more than 2 hours have elapsed after switching off. The deactivation display with the Ferrari 1010 • If the volume had been adjusted very logo will be displayed for 5 seconds.

  • Page 17: Set The Volume

    1011 apply to all radio and audio sources. The volume is increased or decreased. Note: If your Ferrari is equipped with a BOSE Soundsystem, then the menu items , and are not available. , and Push the turn/push control confirm the selection.

  • Page 18: Set The Equalizer

    The cursor will jump to the first control frequency band. Note: Select the frequency band to be If your Ferrari is equipped with the Note: changed by turning the turn/push BOSE sound system then this function The predefined equalizer settings control will not be available.

  • Page 19: Adjusting Balance And Fader

    General operation Once you have completed the desired Adjusting balance and fader Setting the balance settings: Turn the turn/push control to the You can move the center of sound Press the turn/push control longer. right or to the left. impact within the vehicle using the balance and fader adjustment.

  • Page 20: Switching Loudness On / Off

    Select the sound characteristics in the Note: entry Using the setting “ ”, an elevation of Note: higher frequencies will be selected, If your Ferrari is equipped with the using “ ”, elevation medium BOSE sound system then this function 1019 frequencies is selected, and “...

  • Page 21: Subwoofer

    General operation Subwoofer Crossover As an example you can see the adjustment for the front loudspeaker: You can adjust the volume level of the Using this function you can adjust the subwoofer output or turn off the limiting frequencies for the front subwoofer output.

  • Page 22: Compression

    Select the sound characteristics in the entry You can reset all sound adjustments to Note: the default adjustment. If your Ferrari is equipped with the The following settings are reset to the BOSE sound system then this function respective default adjustments: 1020 will not be available.

  • Page 23: Mute

    General operation Mute To deactivate the muting you can: • Again press the turn/push control You can mute your Infotainment, i.e. the longer than 2 seconds. sound of the current radio or media • Adjust the volume by turning the turn/ source is switched off.

  • Page 24: Navigation Mode

    Stars, prominent by him- or herself if he or she will card supplied by Ferrari. landmarks, compasses and satellites etc. follow the directions. Under no circumstances may you are used as navigation tools.

  • Page 25: Insert Memory Card

    Using Navigation Insert memory card Carefully slide the memory card Remove the memory card forward. The slot for insertion of the memory Remove the control panel as described card containing navigation data is under “Removing/inserting the control The eject button placed in the upper left located unter the detachable control panel”...

  • Page 26: Selecting Navigation

    Please contact During calculation of the route the your Ferrari dealer if you want to 2002 symbol will be displayed on the right retrofit the navigation function.

  • Page 27: Calling Up The Navigation Main Menu

    Using Navigation Calling up the navigation main • • will lead you to the entry menu for the Guides menu menu destination address. See “Entering a adjustment of settings relevant to Press the button twice. Destination” on page 28. navigation functions. See “Settings” on page 54.

  • Page 28: Entering A Destination

    Using Navigation Entering a Destination The respective menu is called up and the Select country desired action is initiated. If your destination is in another country Select the entry in the (in the sample display ) then you navigation main menu. Note: must first select the desired country.

  • Page 29: Enter The Destination

    Using Navigation Enter the destination complete place-name Note: previously entered or was automatically Mark the town in the address entry You can delete the last character of the completed, the program moves either to menu (in the example entry by selecting the symbol the place-differentiation list or you can Note: continue directly with the entry of a street...

  • Page 30: Select Destination Town Or Place Using Zip Or Postal Code

    Using Navigation The location differentiation list is Select the desired ZIP or postal code displayed if the selection is ambiguous. by turning the turn/push control and subsequent pressing of the turn/ 2010 push control. The entry menu for the ZIP code (postal 2008 Now the town or place assigned to that code) is indicated.

  • Page 31: Enter A Street For The Destination

    Using Navigation Enter a street for the The entry mark is behind the letters Select the desired street by turning the already entered. To speed up selection, turn/push control and subsequent destination the display shows the name of the street pressing of the turn/push control.

  • Page 32: Enter The Destination City/Town Center

    Using Navigation Enter the destination city/town center 2020 2019 Instead of navigating to a street you can also navigate to a town or city center. Select the desired center by turning The entry mark is behind the letters turn/push control already entered.

  • Page 33: Select Intersection For Destination Street

    Using Navigation Enter destination using Geo co-ordinates 2023 2022 You may also enter a destination using Geo co-ordinates. Press the turn/push control A list with house number ranges is confirm the selection. displayed. In the address entry menu mark Select the desired house number range by turning the turn/push control 2024 and subsequent pressing of the turn/...

  • Page 34: Setting Route Options

    Using Navigation Setting route options Note: Using the route options you can • By selecting you can determine 2099 determine, how the route to the the direction of geographical latitude destination calculated ( =North and =South). Select the symbol in the entry Infotainment system.

  • Page 35: Saving/Leaving Route Options

    Using Navigation By turning the turn/push control • , and Storing destination you can now select among You can save an entered destination in Using these entries you have the the address book. This can be of opportunity of excluding e.g. ferries or advantage in case you want to head freeways from route calculation.

  • Page 36: Navigation Quick Access

    Using Navigation Navigation quick access Press the button. Protect an entry Call up the navigation quick access. In the navigation quick access the last Mark the entry to be protected. 50 destinations you headed to are 2002 Press the turn/push control until displayed.

  • Page 37: Delete Entry

    Using Navigation Delete entry Delete list Saving an entry in the address Call up the navigation quick access. Call up the navigation quick access. book Mark the entry to be deleted. Press the turn/push control until Call up the navigation quick access. Press the turn/push control until a menu is displayed.

  • Page 38: Starting A New Entry

    Using Navigation • Select the symbol in the entry Select the entry by turning the Using this selection you can create menu. turn/push control and subsequent a new entry in the address book. pressing of the turn/push control. Press the turn/push control longer A confirmation of the entry having been •...

  • Page 39: Selecting A Destination In The Address Book

    Using Navigation The selected address book entry will be Selecting a destination in the Select the desired entry by turning the extended by the navigation address turn/push control address book previously selected. subsequently pressing the turn/push You can look for a destination in the control.

  • Page 40: Point Of Interest

    Using Navigation Point of interest Mark the entry • You can select a special destination in You can select a point of interest to be the vehicle environment. For this a main or an interim destination. selection you receive information on 2039 Points of interest (special destinations) which direction and how far away the...

  • Page 41: In Vicinity

    Using Navigation In vicinity Select the letters by turning the turn/ In country push control and subsequently In the special destination menu mark In the special destination menu mark pressing the turn/push control. the entry the entry Accept entry: Select the symbol in the entry 2041 2045...

  • Page 42: In Destination Vicinity

    Using Navigation Select the desired special destination In city, town, or place by turning the turn/push control In the special destination menu mark and subsequently pressing the turn/ 2053 the entry push control. The special destination entry menu is Route guidance to the selected special displayed or, if less than 10 special 2050 destination is started.

  • Page 43: Information On Special Destinations

    Using Navigation Accept entry: Information on special Select the symbol in the entry destinations 2052 menu. You can call up additional information on many special destinations such as Select the desired special destination Press the turn/push control longer a brief description or a phone number. category by turning the turn/push than 2 seconds.

  • Page 44: External Special Destinations

    Using Navigation browse through External special destinations information by turning the turn/push You can select an external special 2038 control destination (point of interest) to be a Note: main or an interim destination. The options menu is displayed. To call the indicated phone number Insert the disc with the external directly, mark the number and press the Mark the entry...
  • Page 45 Using Navigation Mark the desired category. Note: Push the turn/push control The entry 2105 confirm the selection. only be selected for active route guidance. The possibly selectable categories are displayed. 2106 Press the turn/push control confirm the selection. Note: The available special destinations of the •...

  • Page 46: While Route Guidance Is In Progress

    Using Navigation While route guidance is in Navigation status screen By turning the turn/push control you can select among several displays All information relevant to navigation progress in the status display. will be displayed in the navigation status During route guidance, navigation screen.

  • Page 47: Examples For Navigation Displays

    Using Navigation Examples for navigation • “Please turn left after 100 yards • “Please follow the directional arrows”. (100 meters)”. displays Warning 2063 Accident hazard 2061 Traffic laws and regulations always This display shows you that you are on have priority when operating a motor In the upper left portion of the display a non-digitized road or street (e.g.

  • Page 48: Lane Recommendations

    Using Navigation • Route will be calculated again: Lane recommendations In addition to the navigation messages, the Infotainment will issue animated 2108 2066 lane recommendations several streets. This may be useful e.g. with You should turn right and then turn right respect to freeway exits obstructed from at the second exit.

  • Page 49: Options Menu

    Using Navigation Options menu • Canceling route guidance You can cancel the current route Using this function you can cancel the During the route guidance you can call guidance. “Canceling route route guidance before reaching the up the options menu in the navigation guidance”...

  • Page 50: Route List

    Using Navigation Route list Press the button in order to • You can have the planned route leave the route list. As described under “Selecting a displayed by the Infotainment. destination in the address book” on page 39 you can select an address Stopover Select the entry in the options...

  • Page 51: Blocking A Section Of The Route

    Using Navigation Blocking a section of the route Note: Note: Using this function you can block The display appears after reaching the If no operator input occurs, the menu a section of the route starting from the interim destination. closes automatically after a short period next turn at an intersection.

  • Page 52: Adapt Route Options

    Using Navigation Canceling a block Adapt route options Switch navigation announcements If you have entered a block you can also You can adapt the route options while on/off delete this again. navigation is in progress. turn navigation announcements off or on again. Select the entry in the options Select the entry...

  • Page 53: Information During Route Guidance

    Using Navigation Information during route Display/save position Note: guidance • If an interim destination (stopover) is Note: active, the information on the interim The position may also be displayed and Display destination destination will be displayed. Above saved if no route guidance is active. the automobile, will be shown on information...

  • Page 54: Display/Change Route Options

    Using Navigation Press the turn/push control to save Press the turn/push control Settings the current position. In the settings you can enter various settings with respect to navigation. 2082 2078 In the navigation main menu mark the Select among entry The current position was saved in the and the avoid functions (switched on = quick access.

  • Page 55: Arrival Time Announcement

    Using Navigation Press the turn/push control Arrival time announcement Displaying speed limits confirm the selection. You can adjust whether the calculated With this function engaged you obtain arrival time will announced information on the top speed allowed for automatically after calculation of the the section of the route you are currently •...

  • Page 56: Eta Setting

    Using Navigation ETA setting Note: You can influence the calculation of the For routes with dynamic speed limits 2100 expected arrival time. ETA stands for (weather dependent, time of day Estimated Time of Arrival. dependent etc.) a symbol with the Switch the speed limit display on ( ) Mark the entry in the...

  • Page 57: Unit Of Measure

    Using Navigation • When selecting you then need Unit of Measure This setting is the default setting. It to select the desired setting. A control You can adjust calculations of distances provides sufficient accuracy for the range of 50% – 200% is available. The from the metric system (display in ETA calculation for most drivers.

  • Page 58: Radio Mode

    Radio mode Radio mode Switch on radio mode The radio main menu is called up. • The radio main menu for FM is Will lead you to the filter functions Press the button. displayed here in this example. selection menu. See “Filter function” The radio operation is activated.

  • Page 59: Selecting The Waveband

    Radio mode Selecting the waveband • • If an FM station had been set station previously In the radio main menu select the entry previously then this will maintained. maintained or if an AM station had The station memory with a maximum been set then the FM station last of 20 stored stations of FM and AM selected will be set.

  • Page 60: Fm Operation

    Radio mode FM operation Station list By pressing the button or turning All receivable and identifiable stations the turn/push control to the left the In FM operation both wavebands are displayed in the station list. previous station in the station list will be The display sequence depends on the combined.

  • Page 61: Scan Function

    Radio mode Scan function Cancel scan function Note: All of the stations present in the station In the status display press the If the selected entry is a transmitter list will be played for a short time and button or button.

  • Page 62: Manual Station Setting

    Radio mode Manual station setting Switching the filter function on and off Note: You can manually set the desired In the filter menu mark the entry Pressing of the button or frequency. Switch the function on ( ) or off ( ) button causes a station search to the by pressing the turn/push control next receivable station.

  • Page 63: Filter Stations

    Radio mode Filter stations Filtering stations Cancel filter In the filter menu select the transmitter Mark the stations to be filtered in the Cancel all filters chain to be filtered and press the turn/ filter menu. In the filter menu mark the entry push control Switch the filter for this station on ( ) Then mark the entry...

  • Page 64: Program Type

    Radio mode Program type Switching the program type function By selecting in the program type on and off menu all program types are reset to The program type (PTY) is a service In the program type menu mark the switched off. offered by many stations within the entry Radio-data-system (RDS).

  • Page 65: Radio Text

    Radio mode Radio text The function ( ) will be activated by Voice entries pressing the turn/push control stations provide supplemental You can delete the voice entries information to the current program via assigned to the stations or have them the RDS data stream, e.g.

  • Page 66: Reception Optimization

    Radio mode • Reception optimization • After selecting you are Setting for normal operation – i.e. the You can select from three settings to prompted whether you really intend to unit switches from stereo to mono suppress interference and reflections delete all voice entries or not.

  • Page 67: Band Width Control

    Radio mode Band width control AM mode Search function In the status display press the Using the band width control you have button or button. the possibility of improving reception of Possible settings for AM a station under difficult reception stations Turn the turn/push control conditions (Station A has a very close...

  • Page 68: Scan Function

    Radio mode Scan function Cancel scan function Station memory All of the receivable stations will be In the status display press the You can store up to 20 stations of the played for a short time and in this button or button.

  • Page 69: Store A Station

    Radio mode Store a station Other wave range adjusted By turning the turn/push control Mark the station to be stored in the you can select the desired memory You can save the current station if you quick access menu (not for AM wave position.

  • Page 70: Station Memory Already Tuned

    Radio mode Station memory already tuned Move station Delete station The station to be stored is already tuned You can move the position of a station in You can delete the stored station. in and you are in the quick access of the the station memory.
  • Page 71 Radio mode In the status display Select the entry. Create/delete a voice entry Press the turn/push control in the You can create a voice entry for a station status display. stored in the station memory or delete The options menu is displayed. 3023 a voice entry previously created.

  • Page 72: Delete

    Radio mode Select the entry. Read out voice entry The procedure for storing a voice entry You can have the voice entry assigned to is initiated. a station in the station memory read out to you. Delete Mark the station in the quick access Mark the station in the quick access for which you want to delete a voice for which you want to have a voice...
  • Page 73 Media mode Media mode Media mode is a collective designation In all three cases the media quick access Note: of all sources in the Infotainment able to will be displayed only for a short time. • The individual available CDs, play back audio or MP3 tracks.
  • Page 74 Media mode Media status display Note: Note: The media status display is the default If the last title on a CD or a directory is By extended pressing of the display for audio operation. All data played, the Infotainment will play the button you can have the entire name relevant to audio operation will be first track of the next directory or the...

  • Page 75: Track Change / Track Skip

    Media mode Track change / track skip Fast forward/reverse Play mode You can initiate an audible Fast forward/ Play mode is a combined designation for Press the button to select the reverse. functions such as track mix (playback in next track or press the button to random order), the scan function and the Note:...

  • Page 76: Track Mix (Random Play)

    Media mode Note: Note: • Only one of the functions can be By pressing the button or 4005 active ( ) at a time. button the next random track will be played. If the current track was played • By selecting a possibly The play mode menu is displayed.

  • Page 77: Repeat Track

    Media mode Repeat track CD mix Repeat CD With this function activated the current Note: Note: title will be repeated indefinitely. Function is available only if the CD Function is available only if the CD Select the entry in the play changer is the active source.

  • Page 78: Repeat Directory

    Media mode Switch the function on ( ) or off ( ) Call up the media main menu Switching the detailed track display by pressing the turn/push control on/off You can enter settings for media With detailed track display operation in the media main menu. Note: activated, a previously curtailed track With the following description it is...

  • Page 79: Notes On Compact Discs (Cd)

    Media mode CD mode • Before playing the CD, it should be Insert/eject CDs cleaned with a special, commercially Insert available cleaning cloth, wiping from Insert the CD into the CD slot with the Notes on compact discs (CD) the centre outwards. Solvents such as printed side upwards.

  • Page 80: Notes For Cd-R And Cd-Rw

    Media mode Notes for CD-R and CD-RW Temperature Protection MP3 mode You can play back CD-Rs (recordable Circuit CDs) and CD-RW (rewriteable CDs) in To protect the laser diode from General notes on MP3 this unit. Please observe legal excessive heat, a temperature protection The music tracks that you can playback requirements when doing so.

  • Page 81: Create An Mp3 Disc

    Media mode Create an MP3 disc • The display of artist and track names is Additional information on creating MP3 limited to a maximum of 63 characters. files and ID3 tags is provided by your • A maximum of 63 folders containing dealer or on the internet.

  • Page 82: Mp3-Cd Mode

    Media mode MP3-CD mode MP3 memory card/microdrive Insert microdrive/memory card The slot for insertion of the microdrive/ The following items described under mode memory card is located unter the “CD mode” on page 79 apply to the Note: detachable control panel MP3 CD operation: •...

  • Page 83: Remove Microdrive/Memory Card

    Media mode Reinsert the blanking cover as Remove microdrive/memory card Playback sequence on MP3 discs described under “Inserting/detaching Remove the control panel as described blanking cover” on page 15. under “Removing/inserting the control Reinsert the control panel as described panel” on page 14. under “Removing/inserting the control Remove the blanking cover as panel”...

  • Page 84: Creating Play Lists

    Media mode You see an example for a folder Play lists Creating play lists structure on an MP3 file disc. The software WINAMP available free Given the amount of MP3 files which The squares shaded grey resemble the of charge was employed in our trials for may be stored on a memory card/ folders/directories.

  • Page 85: Cd Changer Mode

    Media mode CD changer mode Load/eject the CD magazine External units/ AUX mode To remove the CD magazine, open the The following items described under You can call up a unit externally sliding cover on the changer and press “CD mode” on page 79 apply to the CD connected to the Infotainment as the eject button.

  • Page 86: Telephone Operation

    Telephone mode Telephone operation In the following you find a description Note: Warning of the operation of a cellular phone • The calling lists and quick access Injury hazard connected to the Infotainment using entries described in the following Please make sure to store the cellular Bluetooth®...

  • Page 87: Call Up The Telephone

    Telephone mode Call up the telephone Bluetooth not yet switched on Bluetooth cellular telephone not yet If the Bluetooth is not yet switched on connected when attempting telephone operation, The following display will be issued if Note: the following display is issued. the cellular phone is not yet connected Precondition for direct callup of the when calling up of the telephone mode is...

  • Page 88: Calling Up The Telephone

    Telephone mode Mark the unit to be connected in the list. Calling up the telephone main Push the turn/push control menu 5004 In the telephone main menu you can Continue with the operation as described enter or select telephone numbers, call under “Connecting devices...

  • Page 89: Dial Number

    Telephone mode • Dial number Establishing connection: You can select a telephone number Select the entry in the options Using this function you can enter from the address book. See “Selecting menu. a telephone number and initiate the call a number from the address book” on to that number.

  • Page 90: Selecting A Number From The Address Book

    Telephone mode Once the call recipient accepts the call, Selecting a number from the If several telephone numbers are stored the Infotainment switches to the status in the address book entry, the following address book display for active telephone calls. display appears.

  • Page 91: Call Lists

    Telephone mode The Infotainment uses the following Call lists In the telephone main menu select the display to signal establishment of entry You can have call lists for missed calls, a connection. accepted calls and dialed numbers displayed. 5011 Note: 5010 •...

  • Page 92: Call Numbers From The List

    Select among (Delete) and must be available. Call numbers from the list not Delete). Ferrari principally does not assume any Mark the list entry to be dialed. When selecting the call list will be liability for the “Emergency Services Press the turn/push control deleted.

  • Page 93: Settings

    Telephone mode The following display appears in the Settings Automatic call acceptance status display after establishing the With this function activated ( ) In the settings you can switch the emergency call. incoming calls will accepted functions “Automatic call answering” automatically after 5 seconds.

  • Page 94: Telephone Calls

    Telephone mode Telephone calls • In the lower left, the name of the Accept/decline a call currently connected telephone will be You can accept or decline incoming In the following you will find operating displayed. calls. possibilities available to you during an •...

  • Page 95: Decline A Call

    Telephone mode Terminate call Options menu Note: You can end an active call. To do so, you The options menu can be displayed By selecting the audible signal will have to be in the status display. while a call is active. You can end the be switched off and the previously call, send DTMF sounds and place the active radio or media source will be...

  • Page 96: Hang Up

    Telephone mode Hang up The entry does not need to be confirmed. Private By selecting in the options menu, The individual DTMF tones will be You can route the accepted call via the the active call is ended. See “Terminate transmitted immediately after...

  • Page 97: Functions Telephone Quick Access

    Telephone mode Functions Telephone Quick You have the following operating Call number directly options: Call up the telephone quick access. access Select the desired number or the • You can call the numbers and names The last 20 dialed, accepted or cancelled desired name from the list by turning listed in the quick access directly.

  • Page 98: Protect An Entry

    Telephone mode Protect an entry Delete entries Delete list Call up the telephone quick access. Call up the telephone quick access. Call up the telephone quick access. Mark the entry to be protected. Mark the entry to be deleted. Press the turn/push control until Press the turn/push control until...

  • Page 99: Save A Number In The Address Book

    Telephone mode Save a number in the address • Using this selection you can start book 2030 a new entry in the address book. Call up the telephone quick access. Mark the entry to be saved. • Select the letters of the last name by Press the turn/push control until Using this selection you can amend an...

  • Page 100: Amend An Entry

    Telephone mode Select the letters of the first name by Amend an entry turning the turn/push control Select the entry. subsequently pressing the turn/push 5027 control. Select the symbol in the entry By turning the turn/push control 5026 menu. you can now select among Select the entry to be amended by Press the turn/push control longer...

  • Page 101: Address Book

    Address book Address book In the address book you can complete Call up the address book main Create an entry addresses with telephone numbers and menu In the address book main menu select additional information. You can create the entry In the address book main menu you can the address book entries in such a start new entries, search for entries and...
  • Page 102 Address book Accept entry: Note: Select the symbol in the entry If e.g. a telephone number was entered 6005 menu. under then this will be displayed in place of in the menu. You can now enter additional data: Press the turn/push control longer Symbols are placed in front of the By turning the turn/push control...

  • Page 103: New Entry - Navigable

    Address book have determined under New entry – navigable Entry of the address is similar to the “Automatic dialogues” on page 125 that operation described under “Entering a In the address book main menu select an inquiry should be prompted upon Destination”...

  • Page 104: Search For An Entry

    Address book You need to save the entry once you Search for an entry have entered all the information. When searching for an address book 6008 Mark the entry entry you can look for names or places. Please note the description under The following display is issued upon “Adjusting search criteria”...

  • Page 105: Adjusting Search Criteria

    Address book If the complete place or town has been Adjusting search criteria Note: entered previously completed In the address book main menu select You can delete the last character of the automatically, then the address book the entry entry by selecting the symbol entry is displayed.

  • Page 106: Modifying Entries

    Address book Modifying entries • • You can change the data entered for an After this selection, the stored voice Search the address book entry to be entry. See “Change an entry” on entry will be read aloud. changed. page 106. Change an entry •...

  • Page 107: Delete Entry

    Address book Delete entry Create/delete a voice entry Note: Search the address book entry to be You can enter a voice entry for the If you want to change part of an deleted. selected address book entry or delete an address, the Infotainment will ask you Select the entry.

  • Page 108: Delete

    Address book Delete Export address book The Infotainment will attempt to Search for the address book entry with establish a connection to the desired Using this function you can transfer the the voice entry you would like to device. entire address book in vCard format to delete.

  • Page 109: Pressing Address Book Entry

    Address book Pressing address book entry The Infotainment will attempt to Import the address book entry establish a connection to the desired Using this function you can transfer an You can receive addresses in vCard device. individual address book entry in vCard format from other devices.
  • Page 110 Address book Then, depending on the setting under • Upon successful transfer, the following “Always allow connection” on page 115 Connection to the external device is display will appear. there will either be the following prompt allowed. In addition, the function or if the function is activated then this described under...

  • Page 111: Navigate To The Address Book Entry

    Address book Navigate to the address book Voice entries • You can delete all stored voice entries. entry In the address book main menu select the entry You can initiate a route guidance from In the following prompt select the address book to the address assigned among (Delete), and (Do not...

  • Page 112: Book Entry

    Address book Placing a call to an address Functions in the quick access Protect an entry Call up the address book quick access. book entry The last 20 address book entries used in Mark the address book entry to be the address book will be displayed in the Starting from the address book you can protected in the quick access menu...

  • Page 113: Delete List

    Address book Delete entry Delete list Call up the address book quick access. Call up the address book quick access. Mark the entry to be deleted in the Press the turn/push control until quick access menu displayed. a menu is displayed. Press the turn/push control until a menu is displayed.

  • Page 114: Retrieve General Settings 114

    Settings Settings Retrieve general settings Bluetooth Call up a device list Press the button. You can adjust your Infotainment to Bluetooth® wireless technology is a Turn the turn/push control to the your preferences in the general settings. system for establishing radio connections left until is displayed in the Press the...

  • Page 115: Always Allow Connection

    Settings • Bluetooth is switched off, and a • The symbol will displayed after a Always allow connection telephone connected failed connection attempt. You can With this function activated, Infotainment. then only separate the connection to respective external device can establish the device.

  • Page 116: Name Device

    Settings Name device Delete device from list Delete all devices from list You can change the name of a device You can remove unused or old devices You can remove all devices from the displayed in the Bluetooth devices list. from the Bluetooth devices list.

  • Page 117: Connecting And Disconnecting

    Settings Connecting and disconnecting Connecting devices (Infotainment) Mark the device to be connected in the devices devices list. 7037 A Bluetooth device must be connected to Infotainment before Note: Select for connection or for no communicate with it. • A device not yet connected is connection.

  • Page 118: Connecting The Device

    Settings Connecting device (external External device had already been device) connected with the Infotainment 7038 A connection of the Infotainment to an Note: external device may also be initiated function described under Enter the password by turning and from the external device. “Always allow connection”...
  • Page 119 Settings • External device has not yet been If the connection to the external device Connection to the external device is connected to the Infotainment. can be established, an audible signal will allowed. In addition, the function Upon the connection attempt of the sound again and the following display described under...

  • Page 120: Disconnecting Devices

    Settings • Disconnecting devices Bluetooth, Retrieving settings Connection to the external device is In the device list mark the device with Press the button. allowed. In addition, the function the connection you would like to Turn the turn/push control to the described under “Always...

  • Page 121: Bluetooth Activate/Deactivate

    Settings Searching for Bluetooth devices The search will be cancelled by Using this function you can cause the pressing the turn/push control Infotainment to initiate the search for 7044 Bluetooth devices within the transmitter If the search is not cancelled then the or reception range.

  • Page 122: Devices Visible For Others

    Settings Devices visible for others Device name User voice commands You can adjust whether other Bluetooth You can assign a name to your Here, you can enter settings for voice devices can recognize the Infotainment Infotainment. This name you issue will commands and callout of navigation or not.

  • Page 123: Set System Language

    Settings Press the turn/push control Set system language Select the desired language by turning You can adjust here in which language turn/push control the callouts or displays should occur. subsequently pressing the turn/push control. 7003 Note: • For changing the language or the By turning the turn/push control speaker, the memory card with the you can now select among...

  • Page 124: Display Language Settings

    Settings Display language settings Volume of voice messages With the setting select Using this function you can have the Here you can adjust the volume used for afterwards. currently valid language settings voice messages of your Infotainment. displayed. In the user voice command settings 7008 In the user voice command settings select...

  • Page 125: Automatic Dialogues

    Settings Automatic dialogues Voice entries Delete: You can select here which events should Using this function you can have all Select among , or trigger initiation of an automatic voice voice entries of the radio and address dialogue or not. An automatic dialogue book function read out to you and delete In the following prompt select among automatic...

  • Page 126: Ptt Extended

    Settings • PTT extended Repeat voice announcement In addition to the framed display of the With this function activated the voice With this function switched on and an Infotainment an audible signal will command input will be activated active route guidance in progress sound with the function activated automatically after pressing the buttons pressing the button...

  • Page 127: System Settings

    Settings System settings In the range: • Using can adjust in which direction browsing • Adjustment of display brightness You can adjust various default settings of lists and menus will take place using of your Infotainment to your preferences when turning the turn/push control. •...

  • Page 128: Retrieving System Settings

    Settings Retrieving system settings Audio Note: Press the button. Audio is a collective category for system Using the setting “0” no volume Turn the turn/push control to the settings related to audio functions. increase will occur. left until is displayed in Using the setting “20”...

  • Page 129: Volume Signal Sounds

    Settings Display volume Digital level Note: You can switch the graphical display of You can adapt the volume level of Only one of the two settings can be the volume change on or off. digital (CD and all MP3 sources) to active ( ) at a time.

  • Page 130: Supporting Parking Aid

    Settings Supporting parking aid Display Display color You can select whether the audio Using this function, you can adjust the Display is a collective category for volume will be lowered when engaging display color using predefined color system settings related to display reverse gear.

  • Page 131: Day/Night Design

    Settings Press the turn/push control Day/night design External device accept the desired color scheme. You determine your You can adjust whether an AUX source will leave the menu. Infotainment will switch between day or an external hands-free operation and night design. device will be connected to the Note: Infotainment in place of a CD-changer.

  • Page 132: Reset Function

    Settings Reset function • Data backup The personal data will be deleted. The You can reset the Infotainment back to Using this function you can secure data settings will not be reset. the settings installed upon delivery from your address book and the quick (default).

  • Page 133: Securing Data

    Settings Securing data The data backup will now commence. Mark the memory card from which the For a successful backup the display data backup is to be loaded by turning Note: will appear. the turn/push control • Only the data in the address book and Push the turn/push control Push the turn/push control the quick access for navigation,...

  • Page 134: Direction Of Rotation Of The Turn/Push Control

    Settings Direction of rotation of the Clock The clock settings menu is displayed. The currently set time of day will be turn/push control adjust time displayed in the right hand side portion transmitted by satellite in format and for You can adjust in which direction of the display.

  • Page 135: Software-Update

    Settings Software-Update Your Infotainment may be updated by 7027 inserting a CD with current software. New function of your Infotainment may You will be informed on the installation also be made available by way of an progress via the progress display. update.

  • Page 136: User Voice Commands

    Voice control User voice commands What is voice command The following symbols are used in these • Symbol sample dialogues: In a sample dialogue between voice operation? control system and user this symbol • ...* Using the voice commands you can identifies a user voice command.

  • Page 137: General Pointers On The Voice

    Voice control General pointers on the voice • While giving voice commands, avoid Activating the voice control other noise in the vehicle (e.g. system control system simultaneous conversation on the part The voice control system is ready Principally you can use all commands of passengers).

  • Page 138: Ending Voice Dialogue Prematurely

    Voice control Ending voice dialogue prematurely Voice entries Note: A voice dialogue may be ended at any Depending on the setting of automatic Sounding of the audible signal can be time. dialogues under “Voice entries” on turned on or off as described under page 138 for the radio operation and “Automatic dialogues”...

  • Page 139: Examples For A Voice Dialogue

    Voice control Settings • Detailed voice output Examples for a voice dialogue The voice control system will react at You can modify the voice control Several examples for a voice dialogue certain places with a somewhat longer settings under “User voice commands” are illustrated in the following.

  • Page 140: Example For An Operator Input

    Voice control Example for an operator input FM by quality will be switched on and the quick access menu will be displayed. in radio mode 9002 FM quality In the following description it is An audible signal Òwill sound. assumed that you are in the radio The radio menu is opened.

  • Page 141: Example For Entering A Navigation Destination

    Voice control Example for entering Spell out Memphis M - E - M - P - Navigation An audible signal Òwill sound. H - I - S. a navigation destination In the following description it is command Enter Note: assumed that you are in the radio destination.

  • Page 142: Number 4

    Voice control Say the command Scroll forwards. The entry menu for the street is opened. Would you like to initiate the route Please spell out the first letters of the guidance to the destination Memphis, street. Bannock Street? An audible signal Òwill sound. Say the command Yes.

  • Page 143: Example For Entering A Telephone Number

    Voice control Example for entering The entry menu for the telephone General commands number is opened. a telephone number All commands similar for the various Say the telephone number In the following description it is operating modes are included under the 0 - 7 - 2 - 4 - 1 - 3 - 4 - 5 - 6 - 7 - 8.

  • Page 144: Help Function (Online Help)

    Voice control Help function (Online help) Aborting voice dialogues Select a new list entry Say the command [Select] [line] The online help will inform you on the You can interrupt the voice dialogues at [number] ... (1 - 4) or [Accept] [line] currently speakable commands.

  • Page 145: Quick Access And Main Menus

    Voice control Commands for status displays, • You can call up the address book. Commands for radio mode Say the command Address book or quick access and main menus If the radio mode is selected as the active Name. The following commands apply to source then you can always avail almost all menus, status displays, quick •...

  • Page 146: Commands For The Radio Status

    Voice control Commands for the radio status • Call up the radio main menu • Have a voice entry read out (Page 72). (Page 58). Say the command Read out voice display Say the command Radio menu. entry or Listen to voice entry. Alternative commands: •...

  • Page 147: Commands For The Radio Quick Access

    Voice control Commands for the radio quick • Call up the radio main menu • Call up the voice entries menu (Page 58). (Page 71). access Say the command Radio menu. Say the command Voice entries or Alternative commands: Open voice entries. [Open] radio menu or [Open] menu.

  • Page 148: Commands In The Modify Station Menu

    Voice control Commands in the modify station • Delete the station (Page 70). Radio main menu commands menu Say the command Delete [station]. The following commands are available • Move the station within the station to you in the modify station menu for the memory (Page 70).

  • Page 149: Waveband Menu Commands

    Voice control • Call up the voice entries menu Waveband menu commands • Set the FM waveband alphabetically. (Page 71). command Say the command Voice entries or alphabetically. Alternative commands: Open voice entries. 3002 [Activate] [very high frequency] • Call up the reception optimization alphabetically, [Activate] [VHF]...

  • Page 150: Program Type Menu Commands

    Voice control Program type menu commands Filter menu commands Switch off: Say the command Station number ... (1 - X) filter off or Deactivate filter station [number] ... (1 - X). 3007 3006 • Switch filtering of all stations to off. The following commands are available The following commands are available Say the command Reset or Reset...

  • Page 151: Voice Entries Menu Commands

    Voice control Voice entries menu commands • Delete all assigned voice entries. Reception optimization menu Say the command Delete entries. commands Alternative commands: Delete [all] voice entries or Delete 3011 [all] entries. 3012 The following commands are available to you in the voice entries menu The following commands are available (Page 65): to you in the reception optimization...

  • Page 152: Media Mode Commands

    Voice control Media mode commands • Select CD using the CD number. Commands for the media Say the command CD number ... status display If the media mode is selected as the (1 - X). active source then following Alternative commands: commands are always available to you: [Select] CD [number] ...
  • Page 153 Voice control • Switch on the track mix (random play) • Select next directory (only for MP3 Only if MP3 is active media source: (Page 76). media). • Switch on directory mix (Page 77). Say the command Track mix. Say the command Next directory. Say the command Directory mix.

  • Page 154: Commands For The Media Quick Access

    Voice control Commands for the media quick • Change to an inserted CD with audio • Select playlist using the playlist tracks. number (only playlists access Say the command Audio CD. available). Say the command [Playlist] • Change to a connected CD changer. number ...

  • Page 155: Media Main Menu Commands

    Voice control Media main menu commands Media playmode menu Only if CD changer is active media source: commands • Switch on CD mix (Page 77). Say the command CD mix. 4006 Alternative commands: 4005 The following commands are available CD mix [on] or Activate CD mix. to you in the media main menu The following commands are available •...

  • Page 156: Navigation Commands

    Voice control Navigation commands Switch off: Commands for the navigation Say the command Instructions status display If the navigation is active the following off. commands are always available to you: Alternative commands: Deactivate instructions or Deactivate 2057 • Cancel route guidance (Page 49). voice.

  • Page 157: Commands For The Navigation Quick Access

    Voice control • Call up the block menu (Page 51). Commands for the navigation • Call up the address entry menu Say the command Block. (Page 28). quick access Alternative commands: Say the command Enter address or Address. Edit block, Edit blocking, Edit blockage, Open block,...

  • Page 158: Modify Commands In The Quick Access Destination Menu

    Voice control • Select a destination from the address • Start a navigation to a destination Modify commands in the quick access book (Page 39). stored with voice entry. destination menu Say the command From address Say the command [Navigate to] •...

  • Page 159: Navigation Main Menu Commands

    Voice control Navigation main menu • Start a destination entry (Page 28). Commands for the address command Enter commands entry menu destination. Alternative commands: Enter town, Enter street, Spell town, version 2004 Spell street or Spell destination. • Select a destination from the The following commands are available The following commands are available address book (Page 39).

  • Page 160: Commands For The Special Destination (Point Of Interest) Menu

    Voice control • Enter destination street (Page 31). Commands for the special • Select special destination (point of Say the command Street or Enter interest) in a certain place (town, city) destination (point of interest) street. (Page 42). menu command Special •...

  • Page 161: Commands For The Route Options Menu

    Voice control Commands for the route • Switch the avoid tunnel function on Commands for the interim or off. options menu destination (stopover) menu Switch on: Say the command Avoid tunnel off or Activate avoid tunnel. 2026 2039 Switch off: Say the command Avoid tunnel off The following commands are available The following commands are available...

  • Page 162: Inquiry Whether New Destination Is Main Or Interim Destination

    Voice control • Select a special destination (point of Inquiry whether new destination is Telephone mode commands interest) as an interim destination main or interim destination (stopover). Commands for the telephone Say the command Enter special quick access destination or Special destination. 2096 •...

  • Page 163: Modify Commands In The Quick Access Telephone Number Menu

    Voice control • Call cellular number of an address • Call telephone number in the quick Modify commands in the quick access book entry with voice entry assigned. access. telephone number menu Say the command Call [entry] ...* Say the command Call [telephone] •...

  • Page 164: Telephone Main Menu Commands

    Voice control • Save telephone number in quick Telephone main menu • Call up the settings menu (Page 93). access in the address book. Say the command Settings. commands Say the command Save in the Alternative commands: Open settings or Open telephone address book.

  • Page 165: Call List Menu Commands

    Voice control Call list menu commands Commands in the call lists 5005 5011 5012 • Establish a connection to the entered telephone number. The commands in the three different call • Retrieve call list with missed calls Say the command Dial or Dial lists are identical.

  • Page 166: Settings Menu Commands

    Voice control • Call business telephone number of an • Call telephone number in the quick Settings menu commands address book entry with voice entry access. assigned. Say the command Call [telephone] Say the command Call [entry] ...* number ... (1 - X). 5016 Alternative commands: business.

  • Page 167: Commands For The Address Book

    Voice control Commands for the address Alternative commands: • Call private telephone number of an [New] navigable entry or [New] address book entry with voice entry book navigable address. assigned. Say the command Call [entry] ...* • Start a new address book entry not Commands for the address private.
  • Page 168 Voice control • Start a call to a cellular number • Modify an entry with voice entry • Modify an entry or calling up the assigned to an entry in the quick assigned (Page 106). modification menu (Page 106). access. Say the command Edit [entry] ...*.

  • Page 169: Modify Commands In The Quick Access Entries Menu

    Voice control Modify commands in the quick access Modification menu commands • Have voice entry read entries menu (Page 107). Say the command Read out voice entry or Listen to voice entry. 6016 6026 • Export address book entry (Page 109). •...

  • Page 170: Commands During An Opened Entry

    Voice control Commands during an opened entry Address book main menu • Adjust the search criteria to name (Page 105). commands Say the command Search by name or Set search by name. 6015 • Adjust the search criteria to place 6002 (town, city) (Page 105).

  • Page 171: Voice Entries Menu Commands

    Voice control Voice entries menu commands • Delete all assigned voice entries (Page 107). Say the command Delete entries. 6025 Alternative commands: Delete [all] voice entries or Delete The following commands are available [all] entries. to you in the voice entries menu: Search criteria menu commands •...

  • Page 172: Technical Terminology

    Technical terminology Technical terminology CF card (Auxiliary) (Compact Flash) (GeschwindigkeitsAbhängige Lautstär- Connection for external audio signals. Memory card type, interchangeable keregelung – Speed dependent volume rewriteable memory card developed in control) 1994 by SanDisk. The higher the vehicle speed the higher Balance Volume adjustment between left and CF Typ 1 (3.3 mm thin) and CF Typ 2...
  • Page 173 Technical terminology Loudness Off Road PTY-identification Generates a higher quality sound at low Notification by the navigation system to (Program Type-Identification) volumes by raising treble and bass alert you to the fact that you are in an Identification transmitted by radio levels.
  • Page 174 Technical terminology • abbreviated Radio text Additional information transmitted by • abbreviated some FM stations using RDS. • abbreviated • • abbreviated (Radio Data System) • abbreviated A process for transmitting non-audible • abbreviated information in the FM range. • Surround •...

  • Page 175: Keywords

    Keywords Keywords AM mode .....67 Bluetooth devices Ambient noise ....137 Connecting .
  • Page 176 Keywords Control panel Device Eject ..... .79 Insert .....15 Locked .
  • Page 177 Code number ....13 Ferrari surround ....20 in progress ....53 Country .
  • Page 178 Keywords Microdrive ....82 Navigation quick access Insert .....82 Delete entry .
  • Page 179 Keywords Position RDS ......174 Display ....53 Reached destination .
  • Page 180 Keywords Special destination (Point of interest) Surround ....20 Balance ....19 In city, town, or place .
  • Page 181 Keywords Volume Decrease ....17 Technical data ....182 Voice commands .

  • Page 182: Technical Data

    Technical Data Technical data • Antenna: • Wavebands: Impedance 50 FM 87.5 MHz – 107.9 MHz AM 530 kHz – 1710 kHz • AUX – input: 16 K Input resistance, maximum • Frequency range: input voltage 1.7 Veff 20 Hz – 20 kHz for CD operations 30 Hz –...

  • Page 183: Regulatory Notice

    Dear listener, In conformance with current EC/US guidelines, any person may operate this radio receiver. This unit conforms to the current valid EC/US or harmonized national regulations. This designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility.

Table of Contents