Final Gear Oil - Yamaha Rhino YXR66FAV Owner's Manual

EVU00710

Final gear oil

Checking the final gear oil level
1. Place the vehicle on a level surface.
2. Remove the oil filler bolt, and then check
the oil level in the final gear case.
1. Final gear oil filler bolt
3. Correct oil level
NOTE:
_
The oil level should be at the brim of the filler
hole.
_
2. Final gear oil
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it
to the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
8-13