Standard Models In Fully Aktiv Mode; Aktiv Bass Connection (Balanced Audio In); Upper Frequency Connections; Connection Of Fully Aktiv Models (Artikulat 350A, 340A And 320A) - Linn Artikulat Owner's Manual

Standard models in fully AKTIV* mode
For AKTIV operation of the standard models (ARTIKULAT 350, 340 and 320), using
external power amplifiers and AKTIV modules, please connect as shown below.
IMPORTANT NOTE:
Standard models of ARTIKULAT loudspeakers must have their crossover module and
power amplifier configuration modified by your authorised Linn retailer before
connecting.

AKTIV bass connection (BALANCED AUDIO IN)

The AKTIV input is a balanced-audio
connector and we recommend the use
of a Linn Balanced Interconnect lead
(e.g. Linn part no: CONN 889) or an
interconnect lead with its connections
configured to match with the
ARTIKULAT bass input connections
as shown.
* See AKTIV operation chapter for further details.
BALANCED
AUDIO IN
BALANCED
AUDIO IN
ARTIKULAT 350, 340, 320

Upper frequency connections

SUPER
TWEETER
TWEETER
MID
UPPER BASS
Important note
When using separate power amplifiers and AKTIV modules, please be very careful to
connect all cables from the amplifier to the correct sockets on the loudspeaker. Wrong
connection could result in damage to your loudspeaker drive units and/or amplifier.
Connection of fully AKTIV models
(ARTIKULAT 350A, 340A and 320A)
Connect as described in the AKTIV bass connection (BALANCED AUDIO IN) chapter,
above.
ARTIKULAT Loudspeaker System
13
English
SUPER
TWEETER
TWEETER
MID
Owner's Manual