Nokia BH-108 Quick Manual page 6

switch on the headset. The headset
enters pairing mode, and the green
indicator light starts to flash
quickly.
If the headset has been previously
paired with a device, make sure the
headset is switched off, and press
and hold the multifunction key for
about 5 seconds until the green
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices. For details, see
the user guide of your mobile
device.
4. Select the headset from the list of
found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
device. In some devices, you may
need to make the connection
separately after pairing.
When the headset is connected to
your device and is ready for use, the
green indicator light flashes slowly.
To manually connect the headset to
the last used device, press and hold
the multifunction key for about
2 seconds, or make the connection in
the Bluetooth menu of your device.
You may be able to set your device
so that the headset connects to it
automatically. To activate this feature
in a Nokia device, modify the paired
device settings in the Bluetooth menu.
ENGLISH