Target Recovery; Recovery Tools - Fisher M-Scope 1236-X2 Operating Manual

TARGET RECOVERY

Once you have pinpointed a target, your objective is to recover
it quickly and neatly, leaving virtually no trace of your
excavation. There are almost as many ways to do this as there
are treasure hunters. Whatever works for you is good enough
as long as you don't break any laws, damage vegetation, or
leave your search area looking like a World War II battlefield.
Generally speaking, beachcombers do little if any damage to
the environment while recovering targets. However, if you plan
to use your 1236-X2 on lawns or in parks, your target recovery
method can be very important. Two of the most successful
methods are illustrated in a separate booklet enclosed with your
1236-X2.
NOTE:
Whichever tool or method you choose, remember that
responsible treasure hunters take pride in their ability to leave
soil and vegetation intact and undamaged.

RECOVERY TOOLS

1. A heavy duty, blunt screwdriver is commonly
used by expert treasure hunters.
2. A sturdy hunting knife with a 5-inch blade will do
the job in most soils. A high quality double edged
"survival" knife is an even better (and more
expensive) choice since it will be almost impossible
to bend or break.
CAUTION: Using a jack knife without a locking
blade is a good way to lose a finger!
3. A narrow garden trowel will work in loose or wet
soil.
4. Several excellent digging tools are made just for
the treasure hunter, and specially designed sand
scoops are available for beachcombing.
5. A thin, dull probe is the preferred tool for precise
target location.
16