Installing The Micro-Usim Card - LG E971 User Manual

Getting to know your phone

Installing the Micro-USIM card

Before you start exploring your new phone, you may insert the Micro-USIM card.
The eject button is a small round aperture just above the tray door. To install a new
Micro-USIM card:
1 Insert the SIM ejection tool that comes with the phone (or a thin pin) into the eject
button aperture, and push fi rmly but gently until the tray pops out.
2 Remove the tray and place the Micro-USIM card inside it, with the contacts out and
the angled corner to the right. There is only one possible way to fi t the card snugly
into the tray.
3 Carefully reposition the tray in the slot and push it gently back into the phone.
NOTE: Make sure the gold contact area on the card is facing downwards.
34
Eject button aperture