Faq & Technical Support - C-Media Multi-Easy User Manual

7. FAQ & Technical Support
Q1¡ G Why play CD without sound ?
Most general case was digital CD playback function did not open. Because USB
audio is digital signal, it is use different path to process CD music with traditional
analog CD.
You should open "Device Manager", select "DVD/CD ROM drives" and open it.
Then switch to "properties" page and enable digital CD audio.
Q2¡ G Why sometimes Win98SE and WinME can not auto detect USB audio device
and switch?
Since Win98SE and Win ME have different driver architecture with Win2000 and
WinXP. When users plug in/out USB audio device too much time or faster, these
two OSs may not detect the change on device. So, sometimes user got to switch
audio device to USB audio device by them self.
While user plug in USB audio device on Win98SE and WinME system, if system
cannot switch audio device to USB, please open "Control Panel", select "Sounds
C-Media Xear 3D Sound Solution For USB Multi-Channel User Manual Rev. 1.0
23