LED Descriptions ............9 LED Table..............10 Troubleshooting.............. 11 The Router is not Functional........11 The ADSL Link LED Blinks but Does Not Go Solid . 12 The DSL Link LED is Always Off ......12 ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
User Guide Introduction Thank you for choosing ECI Telecom’s B-FOCuS 312+ Router as your gateway to the world of fast Internet. Your new router is a state-of-the-art unit that includes an ADSL router and an advanced router, enabling you to create and connect a network of computers to a single ADSL line.
User Guide Hardware Installation The following diagram and explanations will help you install your router. Figure 1. B-FOCuS 312+ Router Connection Diagram To connect your router 1. Connect one end of the RJ-45 Ethernet cable to a LAN port on your router and the other end to the LAN port of one computer.
From the computer desktop, select Start > Settings > Network and Dial-up Connections > Local Area Network. To restart your network card, click Disable and then restart the network card. Try again to log in to the configuration utility. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
Page 8
Delete Cookies, Delete Files, and Clear History. Try again to log in to the configuration utility. 4. Click the Setup tab. You have logged in to the configuration utility and are now ready to configure your router. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
3. In the Options section, it is recommended to enable NAT and Firewall in order to protect your network from intrusions. 4. Configure the parameters for the network. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
Page 10
You have completed the basic software configuration for your router. The router will restart after a few seconds and connect to the Internet. Open your browser and enjoy surfing the net. If you are unable to connect to the Internet, see Section 6, Troubleshooting. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
B-FOCuS Router 312+ User Guide Safety Considerations The B-FOCuS 312+ Router is designed for in-house desktop use only. Therefore: • Do not expose to direct sunlight. • Do not expose to temperatures exceeding 40°C. • Do not immerse in water, and do not dampen or install in wet conditions.
• Power. Make sure you observe the proper power requirements. • ADSL Port. WAN interface that connects directly to the phone line. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
LAN port. If it flickers, network activity is in progress. • Internet Link. The Internet LED is off if no connection is established or the connection is not used. When it is green, an Internet connection has been established. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
ADSL line is ADSL Link connected trained training Wrong type of Ethernet line is Ethernet traffic LAN Link Ethernet cable connected is flowing used No Internet link Internet link Internet Link established established ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
• Disable proxies on your browser. If you access the router, and instead of receiving the Login window, the browser displays a login redirection message, you should verify that JavaScript support is enabled. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...
Verify that the phone line is connected directly to the wall socket and to the ADSL input on your router. If you have installed a splitter on the phone line, and accidentally connected the router to the phone side, the ADSL light will not come on. ECI Telecom Ltd. Proprietary DWG# 458006-0833-010 A00...