Table of Contents
Advertisement
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
Operating Instructions
longer cord.
Grounding Instructions
operator from electrical shock.
Before Turning "ON"
have been removed from the heater.
annually.
Turning "ON"
Note
is on.
Note:
While Heater is "ON"
If heater tips over, the heater will automatically turn "OFF".
If heater tips over:
CAUTION: Dome, pole and shroud cover may be hot. Use heat resistant gloves to set
heater upright.
If no damage continue to next step.
Do NOT use the heater if there is any sign of damage. A qualified technician should
inspect and make any nescessary repairs before the heater is used again.
Turning "OFF"
Cleaning and Care
Notices
1. Abrasive cleaners will damage this product.
2. Never use oven cleaner to clean any part of heater.
3. Do not clean any heater part in a self cleaning oven. The extreme heat will damage
the finish.
4. Inspect heater before each use.
5. Have heater inspected annually and repairs should be made by a qualified service
person.
6. Do not clean heater with combustible or corrosive cleaners. Use warm, soapy water.
7. Do not paint engine, engine panels or dome.
8. This heater should be thoroughly cleaned on a regular basis.
9. After a period of storage and/or non use, inspect for any abrasion, wear or cuts to the
Figure 1
power cord.
Cleaning Surfaces
soda.
Note: While cleaning your unit, be sure to keep the area around the heating element dry at all
Maintenance
Figure 2
To enjoy years of outstanding performance from
maintenance activities on a regular basis:
Metal Screw
passages around the heating element clean.
Replacing the Fuse
5. Reattach the fuse cover.
Instructions.
Storage
Between Uses and During Periods of Extended Inactivity or
When Transporting:
passages.
Wait until heater is cool before covering.
page no.
5
Figure 4
Remove fuse cover
Figure 5
Remove old fuse
Advertisement
Table of Contents
