Page
56
Caution
When removing the muting wire from the action, first loosen the two adjustment screws on the Hammer
Rail Stopper Arm.
MAINTENANCE PRECAUTIONS (GRAND PIANO)
9
Hammer Rail Stopper Arm
Disconnecting the AnyTimeX action sensor
When maintenance of the grand piano action is required, first
ensure that the power is turned off, then proceed to disconnect
the AnyTimeX action sensor in the following order:
Open the locks at the top and bottom of the connector.
Unfasten the metal binder.
Unplug the connector.
Raise the lever located on the left side of the action.