Page
10
2. BASIC OPERATION
This section provides the basic procedures for turning the power on, activating AnyTime mode, and performing
with headphones.
Step 1
Plug the AC adaptor into the DC IN connector located at the rear of the
2
instrument.
Step 2
Plug the AC adaptor's power plug into the electric wall outlet.
Step 3
Turn the Power/Volume knob clockwise, to the half-way position.
The LED above the Power/Volume knob will light up to indicate that the
AnyTimeX control panel is turned on.
ACTIVATING ANYTIME MODE
Step 4
Depress the Mute pedal, then slide it gently to the left to mute the acoustic piano sound and activate
AnyTime mode.
Do not attempt to activate/deactivate AnyTime mode while playing the piano, as this can cause serious damage
to the action mechanism of the instrument.
Pedals
(Soft)
(Mute)
(Damper)