Related Manuals for Alto ALTO LINK
Summary of Contents for Alto ALTO LINK
- Page 1 User's Manual ALTO LINK SPLITTER / MIXER www.altoproaudio.com Version 1.3 September 2005 English...
- Page 2 SAFETY RELATED SYMBOLS Fuse To prevent fire and damage to the product, use only the recommended fuse type as indicated in this CAUTION manual. Do not short-circuit the fuse holder. Before RISK OF ELECTRIC SHOCK DO NOT OPEN replacing the fuse, make sure that the product is OFF and disconnected from the AC outlet.
- Page 3 PREFACE Dear Customer: Thanks for choosing LTO LINK SPLITER/MIXER and thanks for choosing one of the results of LTO AUDIO TEAM's work and researches. For our LTO AUDIO TEAM, music and sound more than a job are first of all passion and let us say our obsession! We have been designing professional audio products for a long time in cooperation with some of the major brands in the world in the audio field.
-
Page 4: Table Of Contents
TABLE OF CONTENT 1. INTRODUCTION..........................4 2. FEATURE LIST...........................4 3. CONTROL ELEMENTS........................4 3.1 The Front Panel 3.2 The Rear Panel 4. INSTALLATION & CONNECTION.....................6 4.1 Mains Connection 4.2 Audio Connection 4.3 Rack Mounting 5. APPLICATIONS..........................8 5.1 How to use LTO LINK as the splitter 5.2 How to use LTO LINK as the mixer 6. -
Page 5: Introduction
1. INTRODUCTION First, Let's give our sincere appreciation for your confidence in products by purchasing our LINK, SPLITTER / MIXER, it is really the most effective support to us. Herewith, we can assure you that it will be one of the best choices you have ever made, and wish you will enjoy your audio systems with the LINK all the times. -
Page 6: The Rear Panel
(5). OUTPUT LEVEL meter This 4-digit meter tells you the level of the main output signal. While the Clip LED lights up, please turn down the main signal at either each input stage or the main output stage, otherwise, the system will be distorted. (6). -
Page 7: Installation & Connection
The fuse-holder above the AC connector on the rear of the chassis has 3 triangular markers(please refer to the above pictures), with two of these triangles opposing each other, your unit is set to the operating voltage printed next to these markers. To change, pull fuse-holder out and rotate 180 ,then push in again. -
Page 8: Rack Mounting
For XLR connector Pin2 (+) Pin2 (+) Pin3 (-) Pin3 (-) (Linked to Pin1 manually, Pin1 ( ) Pin1 ( ) XLR Type Unbalanced XLR Type alanced b. In Line Connection LTO LINK provides XLR connectors and 1/4" TRS phone jack to easily interface For these applications, the with most professional audio devices. -
Page 9: Applications
5. APPLICATIONS From the panel introduction on the chapter 3, you must have caught a clear answer to " What is it?" in your mind as to our LINK, SPLITTER / MIXER, hereafter, we will show you the further explanation on "How to use it?", so that, you can be the real master of this unit. -
Page 10: Specifications
6. SPECIFICATIONS Connectors XLR and 1/4" TRS AUDIO INPUTS Type RF filtered, servo-balanced input Impedance 50 kOhms balanced, 25 kOhms unbalanced Nominal operating level -10 dBV to +4 dBu Max. input level +21 dBu balanced and unbalanced Typ. 40 dB, > 55 dB @ 1 kHz CMRR Connectors XLR and 1/4"... -
Page 11: System Block Diagram
7. SYSTEM BLOCK DIAGRAM LINK MAIN_LEFT MAIN_LEFT MAIN_RIGHT MAIN_RIGHT LEVEL BALANCE SPLIT/MIX SPLIT/MIX LEVEL BALANCE SPLIT/MIX SPLIT/MIX LEVEL BALANCE SPLIT/MIX SPLIT/MIX LEVEL BALANCE SPLIT/MIX SPLIT/MIX LEVEL BALANCE SPLIT/MIX SPLIT/MIX LEVEL BALANCE SPLIT/MIX SPLIT/MIX... -
Page 12: Warranty
8. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to purport a more effective and efficient after-sales warranty service. - Page 13 No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151 Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright 2005 SEIKAKU GROUP NF 01178-1.3...
Need help?
Do you have a question about the ALTO LINK and is the answer not in the manual?
Questions and answers