Toshiba L9363 Digital Series User Manual page 104

INFORMATION
• For 58L9363: Use the 3D glasses in the following
viewing angle.
Otherwise, you may not see the correct 3D image.
Effective viewing angle: within 30° horizontal, 20° vertical
• For 65L/84L9363: For optimal 3D effect and to avoid
eye fatigue it is important that you properly select your
viewing position.
The best viewing position is at the indicated viewing
distance with your eyes at the same level as the centre of
the display as shown below. The centre of the optimum
viewing area varies from set to set. The usable viewing
area is generally over the range shown in the table below
(actual angle not depicted in drawing).
Centre of Display
Viewing Distance
Model Viewing Angle
65L9363 Approx. 16 deg.
84L9363 Approx. 30 deg.
IMPORTANT: If you see a double image, your eyes are
either too high or too low in relation to the horizontal centre
of the screen. Adjust your position so that it is closer to the
centre to avoid eye fatigue and to enjoy optimum 3D
effects.
• Switching left and right images
The left and right images of the glasses can be
swapped. If 3D images look blurred, switch the left and
right sides of the 3D image.
If the 3D PIN number has been forgotten:
Use the Master PIN code of 1276, and then change to a
number of your choice. Select 3D PIN from the 3D Setup
menu to enter PIN.
Same height as
Centre of Display
Viewing Angle
Viewing Distance
Over 2.4 m
Over 3.1 m
104
For 58L9363: Notes on handling the 3D glasses' liquid
crystal shutter lenses
• Do not put excessive force on the lenses.
• Do not scratch the surface of the lenses with sharp
objects.
• Do not drop or bend the 3D glasses.
For 58L9363: Notes on IR communication
• Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.
• Do not cover the IR sensor on the 3D glasses with
stickers or labels.
• Keep the IR sensor on the 3D glasses clean.
• The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glasses not to work
correctly. Use the TV and 3D glasses in a place where
they will not interfere with other devices or products.
Notes on watching the TV
• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
• For 58L9363: If you use any device, such as a mobile
phone or mobile wireless device, near the 3D glasses,
the 3D glasses may not work correctly.
• For 58L9363: Use the 3D glasses in the temperature
range of 0°C - 40°C (32°F - 104°F); otherwise, the
quality of the 3D image or the reliability of the product
cannot be guaranteed.
• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or use another
light. (It is not recommended to watch the TV in a dark
room, especially for children.)
• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.
• The 2D to 3D conversion function is activated and
controlled by you according to your personal
preferences.
• The 2D to 3D conversion function is meant for
enjoyment of 2D home video, and other 2D content you
create, in 3D according to your personal preferences.
• The 2D to 3D conversion function is not intended for
use with pre-recorded 2D copyrighted content owned
by a third-party unless the copyright owner has given
direct or indirect permission, or unless applicable law
permits such use.
About the connecting cable
• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible Blu-ray
Disc™ player or PC to the TV. When you use a
standard HDMI cable, 3D images may not be shown.