Abocom BCH110 Quick Installation Manual

Abocom bluetooth headset specification sheet

Advertisement

BHC110 -- Bluetooth Headset
Quick Installation Guide

Buttons

Starting to Use

How to Charge

Plug the charger into the headset. Plug the other
end of the charger into an electrical outlet. During the
charging, the red LED turns on and remains on until
charging is complete. When charging is complete (red
LED is off), remove the charger form the electrical
outlet and detach the charger from the speaker.

Pairing Your Headset and Phone

Before you can use your Bluetooth headset you're
your phone it has to be added once to the phone.
Follow the instruction form the phone user guide on
how to turn on the Bluetooth in your phone. With the
headset and phone in close proximity:
1. Make sure the headset is in power off. Press the
power button for 6 seconds until the blue and red
LED flashes.
2. Initiate the pairing sequence using hands-free
mode if available. The unit may also be paired in
headset mode if hands-free mode is not available.
3. Perform a device discovery from the phone.
For details on device discovery for your phone,
refer to the user guide for the phone
4. Select the Mono Headset from the discovered
devices list, and then confirm following the on
screen prompts.
5. When prompted by the phone, enter the passkey
0000, and then confirm to pair the headset with
the phone.

Controlling Headset Volume

Increase: Press the volume button in the + position
repeatedly until you reach the desired volume level.
Decrease: Press the volume button in the - position
repeatedly until you reach the desired volume level.

Placing and Receiving Calls

Y
our headset supports both Hands-free and
Headset Profiles. Accessing call functions depends on
which profile your phone supports.
Action
Very Long Press Power
Long Press Power
Short Press Power
.
Long Press Redial
Short Press Redial

Using Your Headset Indicators

LED
OFF
Red/Blue rapid flashes
Blue flashes
Red On
Red flashes
Red flashed 5 times
Function
Pairing
Power On
Power Off
Reject a Call
Receive a Call
End a Call
Voice Dial
Redial
Call Transfer
Mute On
Mute Off
Headset
Power Off
Pairing mode
Power On
Charging
Power Low
Powering Off

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCH110 and is the answer not in the manual?

Questions and answers

Summary of Contents for Abocom BCH110

  • Page 1 BHC110 -- Bluetooth Headset Quick Installation Guide Buttons Starting to Use How to Charge Plug the charger into the headset. Plug the other end of the charger into an electrical outlet. During the charging, the red LED turns on and remains on until charging is complete.
  • Page 2: Troubleshooting

    Troubleshooting Q: No connection to phone A: Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth setting in the phone. Q: The headset is automatically switched off A: The battery is too low. The indicator light on the headset flashes red.

Table of Contents