SAFETY SAFETY RULES FOR POWER TOOLS ...2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR AIR COMPRESSORS...4 CIRCUIT REQUIREMENTS 110V OPERATION ...5 GROUNDING ...5 EXTENSION CORDS ...5 SETTING UP AND OPERATING COMMENTARY...6 UNPACKING ...7 SITE CONSIDERATIONS ...7 PREPARING FOR USE ...8 STARTING ...9 PRESSURE REGULATOR ...9 CONNECTING TOOLS ...10 AIR CONTROL VALVE ...10 MAINTENANCE...
Page 4
12. SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool. G8694/G8695/G8889 Air Compressors 13. DON’T OVERREACH. Keep proper foot- ing and balance at all times. 14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance.
Always make sure the pressure in the storage tanks has been released before loading or moving the air compressor. valve on the air tanks. This is preset to 150 PSI. G8694/G8695/G8889 Air Compressors...
Always repair or replace extension cords when they become worn or damaged. G8694/G8695/G8889 Air Compressors In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent.
Grizzly’s commitment to customer satisfaction. The G8694 is a 2.0 HP unit with a 7 gallon tank capacity and delivers 3.0 CFM@90 PSI. The G8695 is a 2.5 HP unit and has an 11 gallon tank capacity and delivers 3.5 CFM@90 PSI.
Customer Service. G8694/G8695/G8889 Air Compressors Site Considerations When determining where to set up the compres- sor in the shop, or when taking the air compres-...
2. Be sure the air filter is attached to the side of the cylinder head. 3. Check the oil level in the motor crankcase. For the G8694 and G8889 the oil is checked by removing the filler cap and checking to make sure the oil level is between the two marks on the end of the dipstick.
Starting Make sure the compressor switch is in the OFF position (the red button on top of the control box should be in the fully depressed position, see Figure 3) before connecting to the power supply. Close the drain cock on the tank. Pull the switch to the ON position.
Fig 5. Air control lever in closed position. There is also a pressure release valve which can be used when decompression of the storage tank is needed quickly and efficiently. Pull the metal ring to release the pressure. Air Control Valve Lever G8694/G8695/G8889 Air Compressors...
Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this tool with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur. G8694/G8695/G8889 Air Compressors...
Stays Open And Motor trying to overpressure the tank Won’t Stop Running 2. Faulty pressure relief valve. G8694/G8695/G8889 Air Compressors CORRECTIVE ACTION 1. Check power line for proper voltage. 2. Inspect all lead connections on motor, switch and cord for loose or open connections.
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.