Declaration Of Conformity - Macpower & Tytech MovieStar User Manual

Declaration of Conformity

MovieStar has successfully passed the EN 55022 (Emissions Environment) and EN 55024
(Immunity Environment) EMI test procedures. Subsequently, this product is fully CE compliant and
assigned with the CE mark.
Moreover, MovieStar is a Class B digital apparatus that meets all requirements of the Canadian
Interference Causing Equipment Regulations.
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received including any interference that may cause undesired operation
© Copyright 2004 by Macpower&Tytech Technology Co., LTD. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. Macpower&Tytech Technology assumes no responsibility
for any errors contained in this manual. Macpower&Tytech Technology reserves the right to make changes in the specifications and/or
design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the
product that you are using and are there for illustration purposes only. Macpower&Tytech Technology assumes no responsibility for any
differences between the product mentioned in this manual and the product you may have.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
The socket – outlet shall be installed near the equipment and
shall be easily accessible. In case of emergency, it is
necessary to be able to disconnect the device immediately from
the electrical network by disconnecting the device power cable
either from the outlet or from the device inlet.
Other devices connected to MovieStar should be compliant with
safety regulations and should be SELV (safety extra low
voltages) devices or circuits in order for MovieStar to fulfill the
safety requirements.
27
■