Advertisement
Electric Fireplace Stove with Heater
INSTALLING AND OPERATING THIS APPLIANCE
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY,
AN ELECTRIC SHOCK OR FIRE MAY RESULT, CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER
THIS IS AN UNVENTED ELECTRIC APPLIANCE. DO NOT ATTEMPT
TO BURN WOOD OR MANUFACTURED FIRELOGS IN OR ON THIS
IMPORTANT: Read all instructions and warnings carefully before starting
installation. Failure to follow these instructions may result in a possible electric
shock, fire hazard and/or injury and will void the warranty.
For Customer Service:
Email:
resolutions@netdirectmerchants.com
888.867.1177
Phone:
Manufactured in China for Comfort Smart™ (A Net Direct Merchants Brand)
OPERATING MANUAL
Model: ND-18D2S
CONSUMER SAFETY INFORMATION
PLEASE READ THIS MANUAL BEFORE
WARNING!!
APPLIANCE.
APPLIANCE OR GRATE.
217 North Seminary Street, Florence, AL 35630
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Comfort Smart ND-18D2S
Summary of Contents for Comfort Smart ND-18D2S
- Page 1 For Customer Service: Email: resolutions@netdirectmerchants.com 888.867.1177 Phone: Manufactured in China for Comfort Smart™ (A Net Direct Merchants Brand) 217 North Seminary Street, Florence, AL 35630...
- Page 2 IMPORTANT SAFETY INFORMATION When using electrical appliances, in order to reduce the risk of fire, electrical shock, and injury to persons, basic precautions should always be followed, including the following: Read all instructions before using this appliance. 18. There is a thermostat limiter inside the heater. When the This appliance is hot when in use.
- Page 3 OPERATING INSTRUCTIONS A. Caution The appliance is hot while in use. Be sure to keep any combustible material at least three (3) feet away from the heater. The area directly around the fireplace heater must be clear and free of any obstructions. In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 4 Figure 2 Please f ollow t hese i nstructions. USING A P OZIDRIV O R P HILLIPS REMOVE L EG F ROM B AG. L OCATE SCREWDRIVER, ...
- Page 5 The heater has two functions. One is to simulate the fire flame and the second is to operate the fan and heater. The switches are located below the stove door under the rectangular, hinged cover (see Figure 4). Figure 4 The knob on the left sets the heat level, so that the thermostat automatically turns the heater on and off to maintain the desired temperature.
- Page 6 MAINTENANCE During any service of this appliance, the power to the unit must be turned off and unplugged from the wall outlet. A. Changing Light Bulbs The appliance comes with two G9 120V 25W Halogen Incandescent light bulbs (max 25W). See Figure 5. ...
- Page 7 TROUBLESHOOTING GUIDE PROBLEM SOLUTION No power. All switches are A. Check that the unit is plugged into in the ON position and the a standard 120V power outlet. unit does not work. B. Check that the “Master” switch is on (see Figure 3). 2.
- Page 8 STANDARD 1-YEAR WARRANTY Net Direct Merchants (hereinafter referred to collectively as the “Company”) warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations: 1.
Need help?
Do you have a question about the ND-18D2S and is the answer not in the manual?
Questions and answers