Sportster Flash Specifications - US Robotics Sportster Flash x2 User Manual

Sportster Flash Specifications

Compatibility
Speeds
Error correction
Data compression
Operation
Format (DTE-DCE)
Command set
Flow control
Telephone interface
Voice coding
Tone detection
Call differentiation
Silence detect
Dialling
Call status
Configuration storage Two modem configurations and four telephone
Transmission level
Reception sensitivity -43dBm
Operating temperatureFrom 0 to +50 °C
Storage temperature
Transportation
temperature
Operating humidity
Storage humidity
Operating altitude
Data: ITU-T V.34 (Inc. 33,600bps), V.FC, ITU-T
V.32bis, V.23, V.22 bis, V.22, V.21 and Bell 212A,
103.
Fax: Send and receive Group III Fax,
Class 1, Class 2.0; ITU-T V.17, V.29, V.27 ter
Data: 33.6K, 31.2K, 28.8K, 26.4K, 24K,
21.6K, 19.2K, 16.8K, 14.4K, 12K, 9600, 7200, 4800,
2400, 1200, 1200/75/1200, 300 bps
Fax: 14.4K, 12K, 9600, 7200, 4800, 2400
ITU-T V.42, MNP 2-4
ITU-T V.42 bis, MNP level 5
Full/Half duplex on 2 wire telephone line
Serial, binary, asynchronous
Compatible with the AT command set; Fax mode: EIA
578 Class 1, EIA 592 Class 2.0
XON/XOFF, RTS/CTS
RJ11
IMA ADPCM
DTMF
Toggle between voice, fax and data
Adjustable level and duration
Pulse (pulses 0-9),
tone (DTMF 0-9, #, *)
Dial tone, busy tone, voice detect
numbers
-10dBm
From -40 to +70 °C
From -40 to +70 °C
From 20% to 80% without condensation
From 5% to 90% without condensation
3000 meters
Sportster Flash x2 - User's Guide 65