AMW 73010 Specification Sheet

Triple Mid Line Urn
Pump Type Brewing System
Models 7303, 7306, 73010
Electric
Features:
Pump Style Brewing Systems
•
Water is heated in large water compartment and is sprayed over the
grounds by two independently controlled water pumps.
• Durable Construction
All A.I.S.I. type 304, 18-8 stainless steel
• Constant Brew Temperature
Brew temperature varies less than 5ºF (3ºC) throughout spay over
• Automatic Coffee Agitation
Thoroughly mixes brewed coffee immediately after spray over
is completed
• Automatic refill of water compartment
Water compartment automatically refills and reheats as needed.
• Low water cutoff System
Protects heating elements from burn out, at start-up or in operation.
• Velvet Smooth Spray Arm
Teflon® coating on spray arm piston prevents liming and insures
smooth operation. Positive "stops" on spray arm for operator ease.
• Dual Spray Arms
Two independent brewing systems with two spray arms allows for
simultaneously brewing of regular and decaffeinated coffee.
• Fast Fill Valve
Saves time filling urn during installation.
Item # _______________________________
Project _______________________________
Date _________________________________
Easy to operate:
• Fully Automatic – Push Button Operation
Simply load brew basket with coffee, align spray arm over basket
lid hole and press brew start button.
• Adjustable Bypass valve on spray arm
Enables proper coffee extraction even with variable water conditions
• Dial Thermometer with color-marked brew zone
• Thermostat adjustable from front
Knob on thermostat has four marked positions: Brew, Hold,
Night Standby and Off.
Serviceable:
• Drain valve in bottom
• Control drawer with all electronic components is
accessible from side