g.
Keyboard (see
h.
Base enclosure (see
i.
System board (see
j.
Heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
116
Chapter 4 Removal and replacement procedures
Keyboard on page
Base enclosure on page
System board on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
88)
93)
106)
111)