Famous Trails ViewCatcher DCB 822 User Manual page 7

D i g i t a l
ViewCatcher
c. View a target through ViewCatcher.
d. Press the shutter/select button Fig.1 .
A beep sounds to confirm that a picture was taken.
. The counter in the LCD decreases by one.
Self-Timer Mode
The self-timer allows a 10 second delay before taking a picture.
a. Press the power/mode button Fig.1 to turn on the camera.
b. Select a picture resolution mode b pressing the power/mode
button to show the " " screen for 640x480 high resolution
mode and the " " screen for 320x240 resolution mode.
Use the shutter/select button Fig.1 to select a mode
a beep will sound to confirm the selection. The mode selected
will show on the LCD. See "Digital Camera Modes" for more
information.
c. Press the power/mode button until the self-timer option displays.
It shows the resolution you chose and a clock.
d. Press the shutter/select button. It breeds a "Be" sound.
e. ViewCatcher beeps when the picture has been taken.
. The counter in the LCD decreases by one
.
Erasing/Deleting Pictures
Use the option to erase the last picture, or use the
to erase all the pictures .
P.5
Click on Install Driver on the software installation screen and follow
the prompts. When prompted, restart your PC. After Windows loads,
connect the ViewCatcher to the computer's USB port
How to download image from ViewCatcher
ViewCatcher
Fig.3:Connecting ViewCatcher to a PC.
Important Note for Device Driver Installation
Depending upon the device drivers that are already installed on your
computer system, the ViewCatcher driver installation just outlined may
not be recognized correctly by Windows the first time you connect he
camera. If this occurs, it is easily remedied by performing the following
in response to the questions Windows will ask you:
7-1.After connecting the ViewCatcher to you PC for the first time,
option
Windows asks you to insert the installation CD into your CD-ROM
driver. Please insert the CD and click the OK Button.
7-2.Windows will tell you it needs to find some files. Windows first
asks for a system file(filename.sys). Click the Browse...button.
ViewCatcher
Fig. 3 .
(see P.12)
A
B
PC with USB port
D i g i t a l
P.8