Download Print this page

Conair number cut HC408C Instructions For Care And Use page 3

20 piece haircut kit

Advertisement

3.
Use this appliance only for its intended use
as described in this manual. Do not use
attachments not recommended by the
manufacturer.
4.
Never operate this appliance if it has a dam-
aged cord or plug, if it is not working properly, if
it has been dropped, damaged, or dropped into
water. Return the appliance to service centre
for examination and repair.
5.
Keep the cord away from heated surfaces.
6.
Never operate the appliance with the air
opening blocked or while on a soft surface,
such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of
lint, hair and the like.
7.
Never drop or insert any object into any
opening.
8.
Do not use outdoors or operate where aero-
sol (spray) products are being used or where
oxygen is being administered.
9.
Always attach plug to appliance first, then to
outlet. To disconnect, turn all controls to "off",
then remove plug from outlet.
10. Do not place appliance on any surface while it
is operating.
11. Do not use this appliance with a damaged or
broken comb or with teeth missing from the
blades, as injury may occur.
12. Avoid skin contact with moving blades.
13. When using the appliance with its cord, be
mindful of tangles or kinks in the cord. If the
cord does become tangled during use, turn the
unit off and straighten cord before operating
again.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is used on Alternating Current
120V AC 60 hertz only. To reduce the risk of elec-
tric shock, this appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will fit in the outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, con-
tact a qualified electrician to install the proper
outlet. Do not change the plug in any way. Do not
attempt to defeat this safety feature.
Your new Conair
haircut kit has everything you
®
need to achieve professional haircuts at home.
Its comes with a new torque motor clipper,
with adjustable taper control and steel blades
for cutting precision. Also included are 10 at-
tachment combs for different hair lengths. It
also comes with a barber comb, barber scis-
sors, barber cape, a carry case for easy stor-
age and travel, 2 styling clips, cleaning brush,
lubricating oil and a blade guard for easy main-
tenance of the clipper blades.
THE CONAIR GUIDE TO CUTTING
HAIR AT HOME
Before you start:
1. Inspect your clipper. Make sure it's free of

Advertisement

loading