Radio Shack RF Modulator Owner's Manual page 7

15-1273C.fm Page 7 Thursday, July 15, 1999 11:59 AM
3. If your TV is already connected to another VHF
input source:
a. Disconnect the input source's 75-ohm cable
from the TV's 75-ohm VHF input terminal,
and reconnect it to the
supplied Hi-Isolation A/B switch.
b. Connect the supplied 75-ohm short cable
between the input terminal on the Hi-Isola-
B
tion switch and the RF Modulator's
terminal.
c. Connect the 75-ohm coaxial cable between
the terminal on the Hi-Isolation switch
OUT
and 75-ohm VHF input terminal on your TV.
input terminal on the
A
RF OUT
7