CONTENTS Cautions and Safety ___________________________________________________ 1 Assembling your MagneTrainer _________________________________________ 2 Using the MagneTrainer with Your Legs __________________________________ 4 Using the MagneTrainer with Your Arms __________________________________ 4 Adjusting the Pedal Resistance __________________________________________ 4 Keeping the Bike in Place ______________________________________________ 5...
Read all instructions in this manual before using the MagneTrainer. Use the MagneTrainer only as described. It is the responsibility of the owner to ensure that all users of the MagneTrainer are adequately informed of all precautions. Never use this device after drinking alcohol; doing so is dangerous and could result in serious injury or accident.
Assembling your MagneTrainer Step 1: Install the Fixed Leg Remove the nuts and washers from the Fixed Leg. Align the bolts of the Fixed Leg with the holes in the Bike, and push the bolts through the holes. Attach a washer and a nut to each bolt and...
Page 5
Step 2: Install the Adjustable Leg Place the bike on a hard flat surface. Insert the Adjustable Leg into the Bike. Then screw the Wing Nut into the Bike and tighten by hand. For the maximum stability, extend the Adjustable Leg as far out as possible. Step 3: Install the Pedals Screw the left pedal into the left pedal arm...
Using the MagneTrainer with Your Legs Start at the Minimum Resistance When you first get the bike, start off at the lowest pedal resistance setting. Gradually increase the tension as you get used to pedaling the bike downward. It’s easier to learn how to use the bike correctly at the lower resistances.
Dycem® pads. Remember to pedal downward. Using the Velcro® Tether (Optional) The MagneTrainer™ comes with two Velcro® straps. One strap has hooks and the other has loops. These can be used to create a tether to keep the bike and the chair together.
We’ve created a free Calorie Calculator (see the section Free Software) which solves this problem. It uses your gender, height, weight, age, pedal speed and the MagneTrainer knob setting to calculate calories burned. It also calculates the wattage of the bike from the resistance knob position and your pedal speed.
Care and Maintenance No Lubrication Needed The MagneTrainer contains sealed bearings for years of maintenance-free use. No lubrication is needed. In fact, some lubricants contain chemicals that can actually harm the bearings. Clean the Dycem® Pads (optional) There are two Dycem® pads attached to the feet of the Adjustable Leg.
Optional Accessories There are several optional accessories available to customize the MagneTrainer to your situation. Some of these are listed below, Ergonomic Hand Pedals – Place your hands in a more natural position Large Foot Pedals – Larger area and longer straps ...
Warranty We stand behind our products. The MagneTrainer and its accessories are covered by a one year warranty on all parts and labor. This warranty is for US customers only; outside of the US, the warranty depends on your local retailer.
Need help?
Do you have a question about the MagneTrainer and is the answer not in the manual?
Questions and answers