Automatic Transmission Tap Shift; Cruise Control - Chevrolet Camaro 2013 Quick Reference Manual

CRUISE CONTROL

Setting Cruise Control
1. Press the On/Off button. The
Cruise Control symbol will illuminate in
white in the instrument cluster.
2. When traveling at the desired speed,
rotate the SET– switch down to set the
speed. The
will illuminate in green in the instrument
cluster.
AUTOMATIC TRANSMISSION TAP SHIFTF
The 6-speed automatic transmission
has a Tap Shift mode that allows you to
shift gears similar to a manual transmis-
sion. When using this feature, the vehicle
will have firmer shifting and sportier
performance.
F Optional equipment
12
Cruise Control symbol
Adjusting Cruise Control
Use the following switches to adjust or
cancel cruise control:
RES+ Resume/Accelerate
Rotate the switch up to resume a set
speed.
If the system is active, rotate the switch
up to increase speed.
SET– Set/Coast
If the system is active, rotate the switch
down to decrease speed.
Cancel
Press to cancel the cruise control
but retain the set speed in memory.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
Using Tap Shift
1. Move the shift lever to the
M (Manual) position. S (Sport
Mode) will be shown in the Driver
Information Center (DIC).
2. Press the paddles on the back of
the steering wheel toward you to
shift gears. Press the left (–) paddle
to downshift and the right (+) paddle
to upshift. The current gear selec-
tion will be shown in the DIC and
HUDF.
If current vehicle speed is too high or
too low for the requested gear, the shift
will not occur.
When coming to a stop, the transmis-
sion will automatically shift to 1st gear
(V6) or to 2nd gear (V8).
See Driving and Operating in your Owner Manual.