Table of Contents
Advertisement
Quick Links
Introduction
The HDMI EDID Emulator Pro is an easy solution to
emulate your display's EDID (Extended Display
Identification Data) information. It can access your
HDMI/DVI display's EDID, edit and upload the modified
EDID.
Features and Benefits
Prevent computers from deactivating inactive
•
HDMI/DVI ports
Supports HDMI Deep Color and 3D
•
Able to read and store EDID of displays (monitors
•
or projectors)
Able to upload EDID into displays
•
Re-synthesize input HDMI stream and maintain or
•
improve signal integrity
Built-in default EDID
•
HDCP 1.1 compliant
•
Easy firmware upgrading through RS-232 serial
•
port
Non-volatile EDID memory can store and recall
•
EDID information even in a power loss
04-0903A
HDMI EDID Emulator Pro
Quick Installation Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SIIG HDMI EDID Emulator Pro
- Page 1 HDMI EDID Emulator Pro Quick Installation Guide Introduction The HDMI EDID Emulator Pro is an easy solution to emulate your display's EDID (Extended Display Identification Data) information. It can access your HDMI/DVI display's EDID, edit and upload the modified EDID.
-
Page 2: Package Contents
Package Contents • HDMI EDID Emulator Pro • 5V/2A Power adapter • 2 screws for wall mount • Software CD and Quick installation guide Layout +5V Power Adapter LEDs RS-232 Mode Display Source Device Figure 1: Layout • RS-232: For firmware updating, connects to your PC's serial port with a DB-9 cable (not included) •... - Page 3 5 = EDID HD (1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 2ch audio 6 = [Manual Mode] EDID Learning from HDMI output 7 = [Serial Command Mode] Software access mode • +5V Power Adapter: Connects to the included 5V/2A power adapter •...
- Page 4 DC Power Jack Refer to the table below for the specifications of the power adapter. Outside Inside Plug diameter diameter length Negative / Positive (OD) (ID) 5.5(mm) 2.1(mm) 10(mm) *Center pin for positive voltage and the outer shield for negative voltage Table 1: Power Adapter Specifications Learning EDID from an HDMI Display Connect the display device to the EDID emulator's...
-
Page 5: Software Operation
Software Operation Set Up Connect a 9-pin to 9-pin serial cable (not included) between the emulator and your PC. Connect an HDMI cable (not included) between your PC and the emulator. Connect an HDMI cable (not included) between the emulator and the display. Turn on your PC and the emulator. - Page 6 Settings Click Auto Scan ComPort to link the emulator with your PC. A Pop-up window "Scan Successfully!" indicates the connection is made. Note: If a caution message pops up, check all cable connections and try again. Figure 4: Scan Message Recall EDID from an HDMI Display Set the EDID emulator to mode 7.
- Page 7 Plug in the included +5V power adapter. Connect the EDID emulator to the PC's serial port. Click Write EDID into Device to write EDID information to the emulator. The EDID reading sequence is done when the green LED turns off. EDID Source Load File: Loads the EDID file that you created or...
-
Page 8: Edid Management
Figure 6: Successful Message EDID Management Write EDID into Device/Monitor: Program EDID information into the connected device/monitor. Save as: Saves the current EDID info to your computer. Analyze: To view/edit the EDID code here. ClickView Detail to get more information; click Edit to modify the EDID info. -
Page 9: Firmware Update
Firmware Update You can download the latest firmware release for the EDID emulator from SIIG's website at www.siig.com. Click Load BIN, type in or browse to the firmware's location. Click Burn, then unplug and replug the power adapter to update the firmware. - Page 10 Blank Page...
-
Page 11: Technical Support And Warranty
(3) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. - Page 12 Fremont, CA 94538-3152, USA Phone: 510-657-8688 HDMI EDID Emulator Pro is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. All other trademarks are the property of their respective owners. September, 2013 Copyright © 2013 by SIIG, Inc. All rights reserved.
Need help?
Do you have a question about the HDMI EDID Emulator Pro and is the answer not in the manual?
Questions and answers