Table of Contents
Advertisement
1
2
3
FRONT PANEL CONTROLS
1
This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened cable.
2
Controls the overall volume level for the clean channel.
Switch in to activate the overdrive 'Crunch' channel. When active, control the amount of distortion with
3
volume with
6
When lit, indicates that the drive channel is active.
4
Controls the Drive channel gain, low down for classic rock and blues, higher up for hard rock and metal. Use in conjunction
5
with
to get the overall level balanced how you want it.
6
6
Controls the overall level of the drive channel. Use in conjunction with
Switch in to apply a scooped mid tone to the drive channel. Also boosts certain key frequencies and 'thickens' up the sound
7
Controls the amount of bass or bottom end present on the clean channel.
8
Controls the amount of mid present on the clean channel.
9
5
6
7
8
4
9
10
11
5
OPERATING INSTRUCTIONS
12
13
14
15
and the overall
5
17
16
Page 6 /12
Advertisement
Table of Contents
