Table of Contents
Advertisement
LOHU 5160P
User Manual
----------------------------------------------------------------------------------------------------------
Output Power - Configure Device Transmit Power, available values depend on
configured Regulatory Domain.
Channel Width - Channel width the device uses to operate. Available values
(depending on Regulatory Domain) are 20 MHz (standard width), 10 MHz (half
width), 5 MHz (quarter width) and 40 MHz (802.11a Turbo mode).
Fragmentation Threshold - Enter the size at which the packets will be fragmented.
Web Login Timeout - Enter the time after which web management session will be
timed out.
Distance to the Peer - Configure distance between Lohuis 5160P device and it's peer.
Please note that this setting is essential to proper link operation - if the value
configured is too low then bridges won't operate reliably.
Packet Aggregation - Enable or Disable built in packet aggregation.
Data Encryption - Enable or Disable over the air Lohuis proprietary data Encryption
here. This encryption scheme only works between compatible Lohuis devices.
Encryption - Please select generic WLAN encryption scheme: WEP, WPA-PSK TKIP or
WPA-PSK CCMP (AES).
WEP Key - Enter WEP encryption key here. Keys are entered as hexadecimal
numbers in following format:
64 bit WEP: xxxx-xxxx-xx
128 bit WEP: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx
156 bit WEP: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx
Pre-shared WPA Key - the key is entered as 8-63 characters long string, ie. Lohuis.
Watchdog - If enabled then Lohuis 5160P device will send 3 ICMP Echo Requests to
the configured IP address, each with 1 minute interval. If there is no single ICMP Echo
Reply to any of these requests then the device will reboot itself.
NTP Server - Configure IP address of the external NTP (Network Time Protocol)
server Lohuis device will obtain current time from at startup time.
ETH Speed - LAN Port connection speed - available values are Auto (Auto
Negotiation), 100Mbps FDX, 100Mbps HDX, 10Mbps FDX, 10Mbps HDX.
SNMP Server - Configure operation of built in SNMP daemon and enter community
string required to access it.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : Info@lohuisnetworks.com
Website : www.lohuisnetworks.com
International Numbers:
-8-
+97142280111
Dubai :
+12123812983
United States:
+442033557669
United Kingdom:
+33170612716
France :
+390662207084
Italy:
+81345506867
Japan:
+541152391407
Argentina:
+552135219853
Brazil :
+92217019804
Pakistan:
Advertisement
Table of Contents
